ICTMP2004- Index of the papers
Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes (ICTMP2004) held in Nyborg, Denmark, 15-18 June, 2004 are indexed as a simple csv file as below.
Fields are as follows:
No. of papers, Authors, Title of the paper, Source, Key words
ICTMP2004-01, Wilson W. R. D., Modelling Tribology in Computer Simulations of Forming Processes, Proc. 2nd ICTMP (2004) 1, Session 1C: Keynote session I
ICTMP2004-02, Childs T. H. C., Friction Modelling in Metal Cutting, Proc. 2nd ICTMP (2004) 15, Session 1C: Keynote session I
ICTMP2004-03, Ike H., Report on Metal Forming Tribology Research in Japan with Special Focus on Environmental Aspects, Proc. 2nd ICTMP (2004) 29, Session 5C: Keynote session II
ICTMP2004-04, Lonardo P. M./De Chiffre L./Bruzzone A. A., Characterisation of Functional Surfaces, Proc. 2nd ICTMP (2004) 39, Session 5C: Keynote session II
ICTMP2004-05, Groche P./Kohler M., Development and Application of Functional Surfaces, Proc. 2nd ICTMP (2004) 63, Session 5C: Keynote session II
ICTMP2004-06, Dohda K., Future Trends of Tribology in Manufacturing, Proc. 2nd ICTMP (2004) 73, Session 10C: Keynote session III
ICTMP2004-07, Chandrasekaran H./Granfors M. and M'Saoubi R., Tribological Aspects of Tool-chip and Tool-work Contact in Machining and the Application of Laser Spectrometry, Proc. 2nd ICTMP (2004) 85, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-08, De Chiffre L., Influence of cutting conditions on chip side curl, Proc. 2nd ICTMP (2004) 93, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-09, Attanasio A./Gelfi M./Giardini C./Remino C., Minimal Quantity Lubrication in Turning: Effect on Tool Wear, Proc. 2nd ICTMP (2004) 103, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-10, Itoigawa F./Childs T. H. C./Nakamura T./Belluco W., Effects and Mechanisms in Minimal Quantity Lubrication Machining of an Aluminum Alloy, Proc. 2nd ICTMP (2004) 111, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-11, Brinksmeier E./Walter A./Giwerzew A./Bleil N., Characterization of Lubrication and Friction Phenomena in Grinding, Proc. 2nd ICTMP (2004) 119, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-12, Kermouche G./Rech J./Hamdi H./Bergheau J. M., Numerical and experimental approach of surface integrity during belt grinding, Proc. 2nd ICTMP (2004) 129, Session 2D: Cutting: Friction; lubrication and wear phenomena
ICTMP2004-13, Badie-Levet D./Dal Santo P./Robert P., Mechanical and Thermal Behaviour of the Tool-Material Couple in the Process of Turning with Active Cutting Coolants and Lubricants , Proc. 2nd ICTMP (2004) 137, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-14, Murayama K./Inasaki I./Suda S./Sugimoto F./Wakabayashi T., Application of a Multifunctional Fluid to Environmentally Friendly Machine tools, Proc. 2nd ICTMP (2004) 145, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-15, Sonoda K./Sunagawa Y./Naridomi M./Ishibashi A., Performance of Used Engine Oils in Metal Forming and Metal Cutting, Proc. 2nd ICTMP (2004) 153, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-16, Fromentin G./Poulachon G./Moisan A., Influence of Lubrication on Form Tapping, Proc. 2nd ICTMP (2004) 163, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-17, Yang L. J., The Effect of Contact Area on the Wear Coefficient of Tungsten Carbide in Turning Carbon Steels, Proc. 2nd ICTMP (2004) 171, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-18, Zuperl U./Cus F., Tool Wear Estimation in End Milling by Using the Adaptive Neuro-Fuzzy System, Proc. 2nd ICTMP (2004) 179, Session 3D: Cutting: Testing of friction; lubrication and wear
ICTMP2004-19, Filice L./Umbrello D./Micari F., FE Analysis of Tool Wear in Orthogonal Cutting, Proc. 2nd ICTMP (2004) 187, Session 4D: Cutting: Modelling of friction; lubrication and wear
ICTMP2004-20, Moriwaki I./Sugimura K./Nakada S., Tool Wear of Gear Shaving Cutter (Evaluation of Edge Radius from SEM Images), Proc. 2nd ICTMP (2004) 195, Session 4D: Cutting: Modelling of friction; lubrication and wear
ICTMP2004-21, Felder E./Rouault de Coligny P., Experimental and numerical simulation of the interaction abrasives/matter in the wiresawing of silicon plates, Proc. 2nd ICTMP (2004) 203, Session 4D: Cutting: Modelling of friction; lubrication and wear
ICTMP2004-22, Dechjarern S./Hibberd R./Weerasinghe V., Effects of Surface Roughness on Friction and Wear Behavior of Coated Cutting Tools: Experimental Approach, Proc. 2nd ICTMP (2004) 211, Session 4D: Cutting: Modelling of friction; lubrication and wear
ICTMP2004-23, Dechjarem S./Busso E./Hibberd R., Effects of Surface Roughness on Friction and Wear Behavior of Coated Cutting Tools: Numerical Approach, Proc. 2nd ICTMP (2004) 219, Session 4D: Cutting: Modelling of friction; lubrication and wear
ICTMP2004-24, Matsumura T./Ono T./Yoshino M./Umehara N./Akagami Y., Glass Machining for Manufacturing a New DNA Chip with Engineering Surface, Proc. 2nd ICTMP (2004) 227, Session 6D: Surface engineering I
ICTMP2004-25, Yoshino M./Aravindan S., Development of High Absorption Functional Surface by Nano Forming, Proc. 2nd ICTMP (2004) 235, Session 6D: Surface engineering I
ICTMP2004-26, Akagami Y./Umehara N., Development of a New Polishing Method using Abrasive Motions Controlled by Dispersion Type Functional Fluid under AC Electric Field, Proc. 2nd ICTMP (2004) 243, Session 6D: Surface engineering I
ICTMP2004-27, Umehara N./Minemura T./Yoshino M., New evaluation method for surface energy and wettability with micron size liquid droplets, Proc. 2nd ICTMP (2004) 251, Session 6D: Surface engineering I
ICTMP2004-28, Gisario A./Quadrini F./Tagliaferri V., Laser surface hardening of fluidized bed machined steel components, Proc. 2nd ICTMP (2004) 259, Session 6D: Surface engineering I
ICTMP2004-29, Barletta M./Santo L./Tagliaferri V., Wear and surface finishing of components manufactured by using the sintering process, Proc. 2nd ICTMP (2004) 267, Session 6D: Surface engineering I
ICTMP2004-30, Nilsson M. S./Olsson D. D./Petrushina I./Andreasen J. L./Bay N./Christensen E./Bjerrum N-J., Development of strategic surface topographies for lubrication in sheet forming of stainless steel, Proc. 2nd ICTMP (2004) 275, Session 7C: Surface engineering II
ICTMP2004-31, Popp U./Engel U., Micro Texturing of Cold Forging Tools-Influence on Tool Life, Proc. 2nd ICTMP (2004) 285, Session 7C: Surface engineering II
ICTMP2004-32, Settineri L./Bugliosi S./Gautier G./Peiretti F., Mechanical Characterization of Nanocomposite Coatings for Cutting Tools, Proc. 2nd ICTMP (2004) 293, Session 9D: Cutting: Tool coatings and wear
ICTMP2004-33, Balaji A. K./Mohan V. S., On the Effects of Tool Coatings on Tool-Chip Interfacial Contact in Machining, Proc. 2nd ICTMP (2004) 301, Session 9D: Cutting: Tool coatings and wear
ICTMP2004-34, El Mansori M./Fouilland L./Ayadi I./Iordache L./Pierron F., High Speed Machinability of Cobalt-base Weld hardfacing for Hot Tooling, Proc. 2nd ICTMP (2004) 309, Session 9D: Cutting: Tool coatings and wear
ICTMP2004-35, Bissacco G./Hansen H. N./De Chiffre L., Effect of Cutting Parameters on Microhardness in 2 mm Slot Milling Hardened Tool Steel, Proc. 2nd ICTMP (2004) 317, Session 9D: Cutting: Tool coatings and wear
ICTMP2004-36, Dubar L./Dubois A./Dubar M., Friction and wear phenomena in cold metal forming: an integrated approach, Proc. 2nd ICTMP (2004) 325, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-37, Sutcliffe M. P. F./Combarieu R./Montmitonnet P., Plane Strain Compression Tests of Aluminium Strip under Boundary Lubrication Conditions, Proc. 2nd ICTMP (2004) 339, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-38, Yoshida F./Hamasaki H., Determination of Plasticity Properties of Metal Surfaces and Coatings by Micro-Indentation, Proc. 2nd ICTMP (2004) 347, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-39, Picque B./Mouret S./Bouchard P.-O./Montmitonnet P./Picard M., Mechanical behaviour of iron oxide scale: experimental and numerical study, Proc. 2nd ICTMP (2004) 355, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-40, Meng Y./Hu B./Chang Q., Control of Local Friction of Metal/Ceramic Contacts in Aqueous Solutions with an Electrochemical Method, Proc. 2nd ICTMP (2004) 363, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-41, Le H. R./Sutcliffe M. P. F./Wang P. Z./Burstein G. T., Development of Metal-to-Metal Contact in Forming of Aluminium with Boundary Lubrication, Proc. 2nd ICTMP (2004) 369, Session 2C: Forming: Friction; lubrication and wear phenomena I
ICTMP2004-42, Azushima A., In Situ 3D Measurement of Lubrication Behavior at Interface between Tool and Workpiece by Direct Fluorescence Observation Technique, Proc. 2nd ICTMP (2004) 377, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-43, Wang Z./Dohda K./Haruyama Y., Effects of Lubricant Velocity and Sliding Velocity on Friction Behavior in Stainless Steel Sheet Rolling, Proc. 2nd ICTMP (2004) 385, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-44, Klocke F./Messner G./Giardini C./Ceretti E., FE-simulation of micro-tribological contacts in cold forming: experimental validation, Proc. 2nd ICTMP (2004) 395, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-45, Azushima A./Kuba S./Tani S./Olsson D. D., Direct Observation of Asperity Deformation of Specimen with Random Rough Surface in Upsetting Process, Proc. 2nd ICTMP (2004) 403, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-46, Ike H., Surface Nano-/Microgeometry Formed by Plastic Deformation with Interfacial Sliding and Bulk Plasticity, Proc. 2nd ICTMP (2004) 411, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-47, Kitamura K./Niimi T., Change of Contact Ratio in Multiple Stage Cold Forging, Proc. 2nd ICTMP (2004) 419, Session 3C: Forming: Friction; lubrication and wear phenomena II
ICTMP2004-48, Jeswiet J./Arentoft M./Henningsen P, Methods and Devices used to Measure Friction, Proc. 2nd ICTMP (2004) 427, Session 4C: Forming: Testing of friction and lubrication I
ICTMP2004-49, Nakamura T./Tanaka S./Hayakawa K./Sugisawa M./Aoyama K./Shibata J., Tribo-Characteristics of Stainless Steel Sheets in Iterative Processes of Sheet Metal Forming, Proc. 2nd ICTMP (2004) 437, Session 4C: Forming: Testing of friction and lubrication I
ICTMP2004-50, Olsson D. D./Bay N./Andreasen J. L., Development of a quantitative lubricant test for deep drawing, Proc. 2nd ICTMP (2004) 445, Session 4C: Forming: Testing of friction and lubrication I
ICTMP2004-51, Valberg H./Uyyuru R. K., New accurate experimental techniques to quantify metal flow inside workpiece and along boundary interface of workpiece - in metal forming, Proc. 2nd ICTMP (2004) 453, Session 4C: Forming: Testing of friction and lubrication I
ICTMP2004-52, Uyyuru R. K./Valberg H., Friction Induced Material Flow in Plane Strain Compression Test, Proc. 2nd ICTMP (2004) 465, Session 4C: Forming: Testing of friction and lubrication I
ICTMP2004-53, Dauchot G./De Castro E./Repoux M./Combarieu R./Montmitonnet P./Delamare F., Application of ToF-SIMS Surface Analysis to tribochemistry in Metal Forming Processes, Proc. 2nd ICTMP (2004) 475, Session 6C: Forming: Development and characterization of lubricants
ICTMP2004-54, Meiler M./Pfestorf M./Merklein M./Geiger M., Tribological Properties of Dry Film Lubricants in Aluminium Sheet Metal Forming, Proc. 2nd ICTMP (2004) 489, Session 6C: Forming: Development and characterization of lubricants
ICTMP2004-55, Ahlroos T./Parikka R./Kupiainen V./Varjus S., Tribological properties of Environmentally Acceptable Lubricants for Metal Working Applications, Proc. 2nd ICTMP (2004) 501, Session 6C: Forming: Development and characterization of lubricants
ICTMP2004-56, Schmid S. R./Yang H./Kasun T. J./Reich R. A., Developments in Emulsion Lubrication, Proc. 2nd ICTMP (2004) 509, Session 6C: Forming: Development and characterization of lubricants
ICTMP2004-57, Zajec B./Vizintin J./Podgornik B., Influence of Emulsion on Sticking of Lamellas after Heat Treatment, Proc. 2nd ICTMP (2004) 521, Session 6C: Forming: Development and characterization of lubricants
ICTMP2004-58, Felder E./Frascati F, Experimental and theoretical analysis of the behaviour of the glass coating lubricating a hot forging operation, Proc. 2nd ICTMP (2004) 531, Session 7D: Forming: Modelling of friction; lubrication and heat transfer I
ICTMP2004-59, Lee J. H./Son I. H./Im Y. T., A Design Guideline of Multi-pass Equal Channel Angular Extrusion for Uniform Grain Distribution, Proc. 2nd ICTMP (2004) 539, Session 7D: Forming: Modelling of friction; lubrication and heat transfer I
ICTMP2004-60, Engel U., Tribology in Microforming, Proc. 2nd ICTMP (2004) 549, Session 9C: Forming: Testing of friction and lubrication II
ICTMP2004-61, Hu Z./Vollertsen F., Scaled Friction Test Integrated in Deep Drawing, Proc. 2nd ICTMP (2004) 561, Session 9C: Forming: Testing of friction and lubrication II
ICTMP2004-62, Dubois A./Deltombe R./Dubar M./Morgado N./Dubar L., Warm drawing simulation of 6060 T6 aluminium: a new way to identify friction parameters, Proc. 2nd ICTMP (2004) 569, Session 9C: Forming: Testing of friction and lubrication II
ICTMP2004-63, Andreasen J. L./Olsson D. D./Chodnikiewicz K./Bay N., Bending Under Tension Test with Direct Friction Measurement, Proc. 2nd ICTMP (2004) 577, Session 9C: Forming: Testing of friction and lubrication II
ICTMP2004-64, Siegert K./Hengelhaupt J., Controlling the Metal Flow by Using the Friction between Sheet Metal and Die in Deep Drawing Processes, Proc. 2nd ICTMP (2004) 589, Session 11C: Forming: Tribology assisted or tribology controlled processing
ICTMP2004-65, Steinhoff K., Self-organizing Tool Surfaces for Metal-working Processes, Proc. 2nd ICTMP (2004) 605, Session 11C: Forming: Tribology assisted or tribology controlled processing
ICTMP2004-66, Wang Z. J./Liu J. G./Wang Z. R., The Role of Interface Adhesive Friction Stress during Viscous Pressure Forming (VPF), Proc. 2nd ICTMP (2004) 613, Session 11C: Forming: Tribology assisted or tribology controlled processing
ICTMP2004-67, Groche P./Nitzsche G., Reduction of friction and wear in deep drawing of aluminum-alloys by generating local hydrostatic pressure lubrication, Proc. 2nd ICTMP (2004) 621, Session 11C: Forming: Tribology assisted or tribology controlled processing
ICTMP2004-68, Klocke F./Massmann T./Lugscheider E./Bobzin K./Bagcivan N., Carbon based tool coatings as an approach for environmentally friendly metal forming processes, Proc. 2nd ICTMP (2004) 629, Session 11D: Forming: Tool materials and tool coatings
ICTMP2004-69, Bobzin K./Lugscheider E./Maes M./Kraemer A., Tribological Investigations of Two Different Graded Zirconium Carbide Films Having Regard to Load;Temperature and Varying Atmosphere, Proc. 2nd ICTMP (2004) 641, Session 11D: Forming: Tool materials and tool coatings
ICTMP2004-70, M'Saoubi R./Fernandez A./Heikkila I./Wiklund U./Merstallinger A., Adhesion and Friction in Sliding Contact between Stainless Steels and Cemented Carbides, Proc. 2nd ICTMP (2004) 649, Session 11D: Forming: Tool materials and tool coatings
ICTMP2004-71, Langlois L./Bigot R./Ettaqi S./Bonin D., Bi-Material Die manufactured from a Bi-Material Sheet obtained by Explosion Cladding, Proc. 2nd ICTMP (2004) 657, Session 11D: Forming: Tool materials and tool coatings
ICTMP2004-72, Kuzman K./Gantar G., The Influence of Lubricant Selection on the Stability of Deep Drawing Process, Proc. 2nd ICTMP (2004) 665, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-73, Rosa P. A./Rodrigues J. M. C./Martins P. A. F., Invert-Forming of Thin-Walled Tubes Using a Die, Proc. 2nd ICTMP (2004) 677, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-74, Liu J./Schmid S.R./Wilson W. R. D, A Three-Dimensional Heat Transfer Model for Forging, Proc. 2nd ICTMP (2004) 687, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-75, Stupkiewicz S./Marciniszyn A., Modelling of Asperity Deformation in the Thin-Film Hydrodynamic Lubrication Regime, Proc. 2nd ICTMP (2004) 695, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-76, Shimizu I./Martins P. A. F./Bay N./Andreasen J. L./Bech J. I., Influence of Lubricant Pocket Geometry upon Lubrication Mechanisms on Tool-Workpiece Interfaces in Metal Forming, Proc. 2nd ICTMP (2004) 703, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-77, Cassarini S./Laugier M./Montmitonnet P., Modelling of Metal Forming Lubrication by O/W Emulsions, Proc. 2nd ICTMP (2004) 713, Session 12C: Forming: Modelling of friction; lubrication and heat transfer II
ICTMP2004-78, Im Y. T./Kang S.H./Cheon J. S., A Novel Technique of Friction and Material Property Measurement by Tip Test in Cold Forging, Proc. 2nd ICTMP (2004) 721, Session 12D: Forming: Testing of friction and lubrication III
ICTMP2004-79, Henningsen P./Arentoft M./Wanheim T., Measurements of Normal and Friction Forces in a Rolling Process, Proc. 2nd ICTMP (2004) 733, Session 12D: Forming: Testing of friction and lubrication III
ICTMP2004-80, Johnsson A., Cold Rolling Tests of Lubricants, Proc. 2nd ICTMP (2004) 741, Session 12D: Forming: Testing of friction and lubrication III
ICTMP2004-81, Huart S./Dubar M./Deltombe R./Dubois A./Dubar L., Skin-pass of galvanized strips: mastering of contact conditions to optimize the process, Proc. 2nd ICTMP (2004) 747, Session 12D: Forming: Testing of friction and lubrication III
ICTMP2004-82, Brenon C./Boude S./Fischer C./Lebrun J.-L./Reszka M., Friction Characterization and Importance in Sheet Metal Forming, Proc. 2nd ICTMP (2004) 755, Session 12D: Forming: Testing of friction and lubrication III
ICTMP2004-83, Wang Z./Nakamura T./Ueda N./Obika T., Tribo-performance of Lubricant Pre-coated Steel Sheet in Bowden Test, Proc. 2nd ICTMP (2004) 765, Session 12D: Forming: Testing of friction and lubrication III