ICTMP1997- Index of the papers
Proceedings of the 1st International Conference on Tribology in Manufacturing Processes (ICTMP1997) held in Gifu, Japan, 19-23 October, 1997 are indexed as a simple csv file as below.
Fields are as follows:
No. of paper, Authors, Title of the paper, Source, Keywords, Nationality
ICTMP1997-01, Wilson; W.R.D., Tribology in Sheet Metal Forming, Proc. 1st ICTMP (1997) 1., Plenary Lectures, USA
ICTMP1997-02, Bay; N. , Cold Forging Lubricants, Proc. 1st ICTMP (1997) 9., Plenary Lectures, Denmark
ICTMP1997-03, Saiki; H. , The Role of Tribology for Improvement of Tool Life in Hot Forging, Proc. 1st ICTMP (1997) 22., Plenary Lectures, Japan
ICTMP1997-04, Jahanmir; S. , Tribology Issues in Machining, Proc. 1st ICTMP (1997) 32., Plenary Lectures, USA
ICTMP1997-05, de Roolj; M.B. /Schipper; D.J. , Characterising Microwear and Material Pickup in Metal Forming Processes by Image Processing Techniques , Proc. 1st ICTMP (1997) 41., Fundamentals of Tribology, Netherlands
ICTMP1997-06, Ike; H. , Boundary Lubrication Films in Metalworking Analyzed by Atomic Force Microscope, Proc. 1st ICTMP (1997) 47., Fundamentals of Tribology, Japan
ICTMP1997-07, Schmid; S.R./Hector; L.G. , Asperity Plowing of Aluminum Alloys in an Atomic Force Microscope , Proc. 1st ICTMP (1997) 53., Fundamentals of Tribology, USA
ICTMP1997-08, Ohkubo; T./Shibata; J./Sato; K./Seki; K. /, Quantitative Analysis for Surface Topography of Aluminum Foil by SEM and AFM , Proc. 1st ICTMP (1997) 59., Fundamentals of Tribology, Japan
ICTMP1997-09, Sutcliffe; M.P.F. , Deformation of Rough Surfaces in Metal Forming Processes, Proc. 1st ICTMP (1997) 65., Fundamentals of Tribology, UK
ICTMP1997-10, Wilson; W.R.D./Lee; W. , Mechanics of Surface Roughening in Metal Forming Processes , Proc. 1st ICTMP (1997) 71., Fundamentals of Tribology, USA
ICTMP1997-11, Wang; Z./ Dohda; K./Yokoi; N./Haruyama; Y. , Outflow Behavior of Lubricant in Micro Pits in Metal Forming , Proc. 1st ICTMP (1997) 77., Fundamentals of Tribology, Japan
ICTMP1997-12, Lo; S.W./Wilson; W.R.D. , A Theoretical Model of Micro-Pool Lubrication in Metal Forming, Proc. 1st ICTMP (1997) 83., Fundamentals of Tribology, USA
ICTMP1997-13, Schedin; E./Gunnarsson; L. , Friction in Sheet Metal Forming , Proc. 1st ICTMP (1997) 91., Sheetmetal Forming, Sweden
ICTMP1997-14, Hsu; T.C./Yang; T.S. , The Computer Simulation of Tribological Influence on StrainPath and Forming Limit in Punch Stretching of Sheet Metal, Proc. 1st ICTMP (1997) 97., Sheetmetal Forming, Taiwan
ICTMP1997-15, van der Heide; E./Huis in't Veld; A. J. , A New Test Method for Ranking Sheet Metal Forming Lubricants , Proc. 1st ICTMP (1997) 104., Sheetmetal Forming, Netherlands
ICTMP1997-16, K. Katoh/K. Kondo, Optimization of Punch Profile in Dome Forming Test, Proc. 1st ICTMP (1997) 108., Sheetmetal Forming, Japan
ICTMP1997-17, Emmens; W.C. , Some Frictional Aspects of Aluminium in Deep Drawing , Proc. 1st ICTMP (1997) 114., Sheetmetal Forming, Netherlands
ICTMP1997-18, Andreasen; J.L./Eriksen; M. /Bay; N. , Major Process Parameters Affecting Limits of Lubrication in Deep Drawing of Stainless Steel , Proc. 1st ICTMP (1997) 122., Sheetmetal Forming, Denmark
ICTMP1997-19, Eriksen; M./Wanheim; T. , Wear optimization in Deep Drawing , Proc. 1st ICTMP (1997) 128., Sheetmetal Forming, Denmark
ICTMP1997-20, Marumo; Y./Mori; T./Kondoh; F./N. Kawai, Improvement of Deep-Drawability of Square Cups by means of Differentioal Lubrication in the Flange, Proc. 1st ICTMP (1997) 134., Sheetmetal Forming, Japan
ICTMP1997-21, Mulki; H. /Mizuno; T. , Tribo-Characteristics of Zinc Coated Steel Sheets, Proc. 1st ICTMP (1997) 140., Sheetmetal Forming, Japan
ICTMP1997-22, Jaworski; J.A./Frigon; A. J./Schmid; S.R. /Wang; J.E. , Tribological Characteristics of Coated Steels in lroning , Proc. 1st ICTMP (1997) 146., Sheetmetal Forming, USA
ICTMP1997-23, Fox; V./Teer; D.G./Hampshire; J. , Wear Resistant MoS2 Coatings , Proc. 1st ICTMP (1997) 152., Sheetmetal Forming, UK
ICTMP1997-24, Lo; S.W. /Horng; T.C. , Surface Roughening and Contact Behavior in Forming of Aluminum Sheet, Proc. 1st ICTMP (1997) 158., Sheetmetal Forming, Taiwan
ICTMP1997-25, Tverlid; S./Abtahi; S./Storen; S./Tjotta; S. , An Experimental and Numerical Study of the Friction Conditions in the Bearing Channel during Aluminum Extrusion , Proc. 1st ICTMP (1997) 164., Extrusion, Norway
ICTMP1997-26, Takai; T./Takatsuji; N./Tokizawa; M./Matsuki; K./Murotani; K. , Effect of Si Content on Surface Quality of Extruded AL-Mg2Si System Alloys , Proc. 1st ICTMP (1997) 170., Extrusion, Japan
ICTMP1997-27, Kamitani; S./Nakanishi; K. /Guo; Y. M. /Kumabe; K. , The Effect of Lubrication on the Surface Condition and Metal Flow of Workpiece in Forming Process , Proc. 1st ICTMP (1997) 176., Extrusion, Japan
ICTMP1997-28, Li; Z.M./Li; Z.C./Wang; E.D. /Wang; Z.R. , Glass-graphite Lubricant and Its Application in Hot Hydrostatic Extrusion Aluminum Alloy , Proc. 1st ICTMP (1997) 182., Extrusion, China
ICTMP1997-29, Steenberg; T. /Christensen; E./Olesen; P./Bjerrum; N.J. , Development of New Lubricants for Cold Forging of Stainless Steel , Proc. 1st ICTMP (1997) 185., Forging, Denmark
ICTMP1997-30, Wang; Z.R./Chen; K.B./Zhou; T.R./Wang; R.W. , Calibrating Curve of the Friction Factor for Compression Ring during the Superplastic State , Proc. 1st ICTMP (1997) 189., Forging, China
ICTMP1997-31, Ngaile; G. /Saiki; H./Ruan; L. /Marumo; Y. /Ogura; M. , Effect of Local Surface Expansion on the Performance of Coating-Based Lubricants in Cold Forming , Proc. 1st ICTMP (1997) 193., Forging, Japan
ICTMP1997-32, Zhang; Z.L./Nakamura; T. /Itoh; M. , Investigation into Friction Testing Method Based on Combined Forward Conical Can-Backward Straight Can Extrusion , Proc. 1st ICTMP (1997) 199., Forging, Japan
ICTMP1997-33, Doege; E./Andreis; G./Romanowski; C. , Ceramics for Forging Tools , Proc. 1st ICTMP (1997) 205., Forging, Germany
ICTMP1997-34, See; K.S. /Dean; T.A. , The Use of Can Extrusion to Determine Wear in Tool Materials for Elevated Temperature Forging , Proc. 1st ICTMP (1997) 212., Forging, UK
ICTMP1997-35, Kurosaki; Y. /Matsui; M. /Mori; T. , Fractal Characteristics of Adhesion Particles on Tool Surface in Metal Forming , Proc. 1st ICTMP (1997) 218., Wear, Japan
ICTMP1997-36, Nakamura; T./Tanaka; S. /Hiraiwa; M. /Imaizumi; H. , Frictional Characteristics of Solid Lubricants for Metal Powder Forming Processes , Proc. 1st ICTMP (1997) 224., Wear, Japan
ICTMP1997-37, Furusawa; T. /Hino; H. /Nakamura; S. , Tool Wear on Cutting of Composites , Proc. 1st ICTMP (1997) 230., Wear, Japan
ICTMP1997-38, Nakamura; T./Matsubara; T./Itoigawa; F./Norihisa; T. , Simulation Test for Cutting Tool Wear , Proc. 1st ICTMP (1997) 236., Wear, Japan
ICTMP1997-39, Yamaguchi; K./Afaghani; J.E.D./Nakomoto; T. /Yoshino; K. , Wear of Sintered Diamond Tool in Cutting SiC Whisker-Reinforced Plastic Composite (Effect of Various Alignments of Whisker) , Proc. 1st ICTMP (1997) 242., Wear, Japan
ICTMP1997-40, Islam; M.A. /Haseeb; A.S.M.A. , A Comparative Wear Study on Heat-Treated Aluminum- Lithium Alloy and Pure Aluminum, Proc. 1st ICTMP (1997) 248., Wear, Bangladesh
ICTMP1997-41, Kobayashi; A./Miwa; T./Mizutani; T./Kayukawa; H. , Study on the Surface Generation Mechanism in Machining, Proc. 1st ICTMP (1997) 253., Cutting, Japan
ICTMP1997-42, Hino; H. /Furusawa; T./Nakamura: S. , Precision Machining on Brittle Materials, Proc. 1st ICTMP (1997) 259., Cutting, Japan
ICTMP1997-43, Yamaguchi; K./Abraha; P./Ando; T. /Uchida; M. , Detection of Surface Textures of Various Materials and Finishing Processes, Proc. 1st ICTMP (1997) 265., Cutting, Japan
ICTMP1997-44, Maekawa; K. /Kitagawa; T. /Childs; T.H.C. , A Friction Model for Free Cutting Steels and its Applicability, Proc. 1st ICTMP (1997) 271., Cutting, Japan
ICTMP1997-45, Kurita; H. /Yamagata; H. /Ishibashi; I. , Lubricity Measurement on Graphite and MoS2 Added High-Viscosity-Lubricants using a Fretting Wear Testing Machine , Proc. 1st ICTMP (1997) 277., Solid lubrication, Japan
ICTMP1997-46, Matsuzaki; Y. /Hosokawa; K. /Kazamaki; T. , Effect of Surface Roughness on Linear Sealing Load of Static Metal Seals , Proc. 1st ICTMP (1997) 281., Solid lubrication, Japan
ICTMP1997-47, Urakaze; K. /Konno; M. /Kawakami; M. /Uemura; M. , Observations of Friction Behavior between Thin Films of Solid Lubricants on Silicon Wafer and Steel Ball and Diamond Sphere under Extremely Low Load , Proc. 1st ICTMP (1997) 286., Solid lubrication, Japan
ICTMP1997-48, Li; K.T./Wang; X.L. /Chen; B.X. , Study of the Wear Failure in Cylinder Surface Topography and its Cryptomorphous Information , Proc. 1st ICTMP (1997) 290., Surface engineering, China
ICTMP1997-49, Haruyama; Y. /Yokoi; N./Kawamura; S./Kimura; Y. , Tribological Properties of TiN Thin Film Coated on Alloy Tool Steels , Proc. 1st ICTMP (1997) 295., Surface engineering, Japan
ICTMP1997-50, Mori; T. , Tribological Behavior of Hard Film Deposited by Sputtering , Proc. 1st ICTMP (1997) 300., Surface engineering, Japan
ICTMP1997-51, Yasuoka; M. /Taniguchi; S. /Kato; N. , Tribological Properties of Hard Coatings Surfaces , Proc. 1st ICTMP (1997) 306., Surface engineering, Japan
ICTMP1997-52, Kohzaki; M. /Matsumuro; A. /Hayashi; T. /Muramatsu; M. /Yamaguchi; K. , Nano-indentation Hardness and Frictional Characteristics of Carbon Nitride Films Produced by lon-Beam-Assisted Deposition , Proc. 1st ICTMP (1997) 310., Surface engineering, Japan
ICTMP1997-53, Arai; T. , Remaining Problems in Surface Coating Application to Material Forming Tools Related to Tribological Behavior , Proc. 1st ICTMP (1997) 316., Surface engineering, Japan
ICTMP1997-54, Murakawa; M./Koga; N. /Takeuchi; S. , Utility of Diamondlike Carbon-Coated Dies as Applied to Deep Drawing of Aluminum Sheets , Proc. 1st ICTMP (1997) 322., Surface engineering, Japan
ICTMP1997-55, Tsuchiya; Y. /Kawaura; H. /Arai; T. /Shima; S. , Effect of Heat Treatment and Partial Coating with VC on Galling Behavior of Tool Steels , Proc. 1st ICTMP (1997) 328., Surface engineering, Japan
ICTMP1997-56, Jones; A.H.S. /Camino; D. /Teer; D.G., Deposition of Novel High Wear Resistant DLC Coatings by Magnetron Sputtering of Carbon Targets , Proc. 1st ICTMP (1997) 334., Surface engineering, UK
ICTMP1997-57, Staeves; J. /Schmoeckel; D. , Topography of Sheet Metal and Its Relationship to the Tribological Behavior during the Forming Process , Proc. 1st ICTMP (1997) 340., Surface topography, Germany
ICTMP1997-58, Meng; Y.G./Liu; X.Z. /Chen; J. , A Dynamic Contact Model for Ultrasonic Wire Drawing , Proc. 1st ICTMP (1997) 346., Surface topography, China
ICTMP1997-59, Saito; M. /Saiki; H. /Kawai; N. , Relationship between Friction and Wrinkling in Cup lroning , Proc. 1st ICTMP (1997) 352., Surface topography, Japan
ICTMP1997-60, Andreasen; J.L. /Krebs; K. /Kann; G. /Bay; N. , Quantitative Evaluation of Lubricants and Tool Surfaces for lroning of Stainless Steel , Proc. 1st ICTMP (1997) 358., Surface topography, Denmark
ICTMP1997-61, Luo; C.H. /Keife; H. , The Influence of Process Parameters upon the Cold Rolling of Aluminium Foils, Proc. 1st ICTMP (1997) 364., Rolling, Sweden
ICTMP1997-62, Azushima; A. /Jimbo; Y. , Effect of Roll Materials on Lubricity in Cold Sheet Rolling, Proc. 1st ICTMP (1997) 372., Rolling, Japan
ICTMP1997-63, Fudanoki; F. /Araki; J./Inoue; S. /Yanai; K. , Development and Evaluation of Model for Mechanism of Formation of Surface Properties of Cold-Rolled Stainless Steel Sheet , Proc. 1st ICTMP (1997) 378., Rolling, Japan
ICTMP1997-64, Shibata; J. /Seki; K. /Ogura; S. /Ohkubo; T. , Performance of Water-based Coolants in Cold Rolling of Stainless Steels , Proc. 1st ICTMP (1997) 384., Rolling, Japan
ICTMP1997-65, Inoue; T. /Uchida; S. /Hamauzu; S. /Nishida; K. /Sugiura; T. , Lubricating and Anti-seizure Effect of Organic and Inorganic Powders for Hot Rolling of Steel Products , Proc. 1st ICTMP (1997) 389., Rolling, Japan
ICTMP1997-66, Kihara; N. /Ihara; H. , Development of Hot Rolling Oil. , Proc. 1st ICTMP (1997) 393., Rolling, Japan
ICTMP1997-67, Yoneyama; T. /Fujita; A./Asaoka; H./Kimura; H./Hoshino; I./Kokubo; M. , Heat Scratch in the Hot Rolling of Aluminum Sheets and Its Relation with the Roll Surface Temperature , Proc. 1st ICTMP (1997) 397., Rolling, Japan
ICTMP1997-68, Zhang; W. /Bay; N. , Cross Shear Rolling - Determination of the Neutral Points Positions , Proc. 1st ICTMP (1997) 403., Rolling, Denmark