Uploaded on 19 Sep. 2000
Metal Forming 2000 - Index of the papers
Proceedings of the International conference "Metal Forming 2000" held in Krakow (Cracow) in Poland, 03-07 Sep. 2000 are indexed as a simple csv file as below.
Fields are as follows:
Session, Source , Title of the paper, Authors, Organization,Nationality of the organization.
Session, Source , Title of the paper, Authors, Organization,Nationality of the organization
Keynote lectures, p. 3-10. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Measuring; modelling and understanding friction in the hot rolling of steel, Beynon J.H. / Li Y.H./ Krzyzanowski M. / Sellars C.M., University of Sheffield, UK
Keynote lectures, p. 11-18. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Characterizing friction in metalworking , Wright R.N., Rensselaer Polytechnic Institute; Troy, USA
Keynote lectures, p. 21-28. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The thermomechanical processing of steels - current status and future trends , Hodgson P.D./ Barnett M.R., Deakin University; Geelong, Australia
Keynote lectures, p. 29-38. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Improving the properties of steel by optimisation of TMCP parameters, Siwecki T., Swedish Institute for Metals Research; Stockholm, Sweden
Keynote lectures, p. 39-44. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Simulation of metal forming processes: toward more global modelling , Chenot J.-L. , CEMEF; Ecole des Mines de Paris; Sophia-Antipolis, France
Keynote lectures, p. 45-54. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Nickel-base superalloy forging for gas turbine applications: process model; microstructural model and validation, Roberts S.M./ Walsh C.A./Reed R.C./ Dandre C.A./Lewis J.P./ Evans R.W. , University of Cambridge, UK
, -----------------------, -----------------------, -----------------------, ,
Contact problems, p. 57-62. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Arbitrary lagrangian eulerian method for the simulation of lubricated contact between solids in metal forming processes , Boman R./ Ponthot J.-P. , Universite de Liege, Belgium
Contact problems, p. 63-69. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Two-step forming of surface microprojections by coining process , Ike H.*/ Plancak M. ** , *Materials Fabrication Lab. RIKEN; Saitama/**University of Novi Sad, Japan/ Yugoslavia
Contact problems, p. 71-78. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Analysis of the contact conditions and its influence on the interface friction in forming processes , Batalha G.F./ Stipkovic Filho M./ Valdez Salazar C.E. , Escola Politecnica da USP, Brazil
Contact problems, p. 79-85. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Hardness and friction properties of PVD coated sheet metal forming dies , Hayward T.R./ Parker B./ Samandi M., University of Wollongong, Australia
Contact problems, p. 87-90. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Friction problem in sheet metal forming , Matuszak A./ Gladysz K., Politechnika Wroclawska, Poland
Contact problems, p. 91-97. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A newly developed test method for characterisation of frictional conditions in metal forming, Wolff C./ Pawelski O./ Rasp W., Max-Planck-Institute fur Eisenforschung GmbH; Dusseldorf, Germany
, -----------------------, -----------------------, -----------------------, ,
Identification and optimization, p. 101-106. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Inverse analysis applied to the evaluation of friction and rheological parameters in hot forming of steels , Szyndler D. */ Lenard J.G. **/ Fyke S.H**/Pietrzyk M. * , *Akademia Gorniczo-Hutnicza/**University of Waterloo, Poland/Canada
Identification and optimization, p. 107-114. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Multi-stage inverse analysis of elliptic cup drawing with the large aspect ratio, Huh H./ Kim S.-H./ Kim Se.-H., Korea Advanced Institute of Science and Technology; Taejon, Korea ,
Identification and optimization, p. 115-119. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., On the evaluation of strain-hardness reference curves from compression tests , Petruska J./Janicek L./ Maros B., Technical University of Brno, Czech Republic ,
Identification and optimization, p. 121-126. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Development of sheet forming optimization using transfer process - Construction of database by CAE , Katayama T.*/ Nakamachi E.**/ Nakamura Y.***/ Ohata T.***/ Kawahara H. */ Morishita Y.* , *Doshisha University, Kyoto/**Osaka Institute of Technology/***Osaka Sangyo University, Japan
Identification and optimization, p. 127-131. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Optimal design of assembled and pre-stressed dies by means of numerical simulation, Biba N. */ Lishny A.**/ Stebounov S. **/ Vlasov A. ***, *Quantor Ltd., Moscow/**TSNIITMASH; Moscow/***Moscow Technical University, Russia
Identification and optimization, p. 133-137. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Deformation of the powder materials during upsetting and hydrostatic loading, /Chernozhukova I.*/ Leshchinsky V.**/ Weinert H. **, *East-Ukraine State University; Lugansk/**Metal Forming Institute; Poznan, Ukraine/Poland ,
, -----------------------, -----------------------, -----------------------, ,,
Numerical methods, p. 141-147. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A 3D contact algorithm for explicit dynamic F.E. code applied to the ironing process , Baillet L./ Clair D./ Walter H./Brunet M., Institut National des Sciences Appliquees de Lyon, France ,
Numerical methods, p. 149-155. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Simulation of metal forming processes using new formulation of triangular and tetrahedral elements, Rojek J. */ Zienkiewicz O.C. **/ Onate E. ***/ Taylor R.L. **** , *IPPT PAN; Warszawa/**University of Wales; Swansea/ ***Universitat Politecnica de Catalunya; Barcelona/****University of California; Berkeley; California, Poland/UK/Spain/USA,
Numerical methods, p. 157-162. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Metallurgical qualities improvement by automatic preform design of forging process, Vieilledent D./ Fourment L. CEMEF, Ecole des Mines de Paris; Sophia Antipolis, France ,
Numerical methods, p. 163-170. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Fundamentals of modelling of shape rolling, Glowacki M., Akademia Gorniczo-Hutnicza, Poland,
Numerical methods, p. 171-178. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Rigid-plastic finite element method and its implementation in the hydroforming processes, Kang B.S./Lei L.P./ Hwang S.M., Pusan National University, Korea ,
Numerical methods, p. 179-184. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Explicit finite element simulation of mould filling in metal injection molding , Barriere T*./ Gelin J.C. */ Liu B. ** , *Universite de Franche-Comte; Besancon/ **Southwest Jiaotong University; Chengdu, France / P.R.China ,
Numerical methods, p. 185-190. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Finite element simulation of orbital forging of large disk for automobile wheel with rocking die , Mori K./ Takahashi H./ Ebihara O. , Toyohashi University of Technology, Japan ,
Numerical methods, p. 191-195. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Finite element model of the three dimensional plastic flow of two phase composites , Malinowski Z. , Akademia Gorniczo-Hutnicza, Poland ,
Numerical methods, p. 197-202. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A finite element simulation of the chip formation in an orthogonal metal cutting , Madrigal M.R./ Batalha G.F./ de Aguiar J.B. , Escola Politecnica da USP, Sao Paulo, Brazil
Numerical methods, p. 203-210. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A simplified approach to modelling three-dimensional forming operations , Pillinger I.*/ Twickler M.**/ Hartley P.*/ Arfmann G.** , *University of Birmingham/**CPM GmbH; Herzogenrath, UK / Germany ,
Numerical methods, p. 211-214. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Production stamping defect simulation with finite element method , Ronda J./ Colville K. , University of Cape Town, South Africa
Numerical methods, p. 215-221. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Simulation of tailored blanks stamping process applying the finite elements method ? based on cupping as an example , Piela A*./ Zimniak Z.** , *Politechnika Slaska/**Politechnika Wroclawska, Poland
Numerical methods, p. 223-227. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Modeling and simulation of the viscoplastic behavior of metallic powders during solid state sintering , Renault D./ Barriere T./ Gelin J.C. , University of Franche-Comte; Besancon, France
Numerical methods, p. 229-235. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Use of finite element method for deeper analysis of rotary piercing , Hofer E./ Kawalla R./ Lehmann G./ Lehnert W. , TU Bergakademie Freiberg, Germany
Numerical methods, p. 237-243. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Prediction of forming limit in the hydroforming processes by using FEM and fracture criterion , Lei L.P. */ Kim D.H. */ Kang B.S. */ Hwang S.M. */ Kang S.J. ** , *Pusan National University/**Hyosung-Catholic University; Taegu, Korea
Numerical methods, p. 245-252. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Prediction of cracks in multistage cold forging operations by finite-element-simulations with integrated damage criteria , Behrens A./ Just H./ Landgrebe D. , Universitat der Bundeswehr Hamburg, Germany
Numerical methods, p. 253-259. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Finite element simulation of cyclic extrusion ? compression , Rosochowski A. */ Rodiet R. **/ Lipinski P. *** , *University of Strathclyde; Glasgow/**Ecole Nationale dfIngenieurs de Metz/***Institut Superieur de Genie Mecanique et Productique; Metz, UK/France
, -----------------------, -----------------------, -----------------------, ,
Rolling, p. 263-267. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Prediction of deformation force at different strains during steel rolling , Kong L.X./ Hodgson P.D., Deakin University; Geelong, Australia
Rolling, p. 269-276. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Development of a shadow finishing mill set-up for hot strip rolling, Rudkins N.T./Holmes K., Corus R;D &T; Welsh Technology Centre; Port Talbot, UK
Rolling, p. 277-283. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Controlled rolling of high carbon wire rod , Cmiel K. */ Kliber J. ** , *Trinecke Zelazarny a.s.; Trinec/**VSB ? Technical University; Ostrava, Czech Republic
Rolling, p. 285-293. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Modelling of temper rolling considering surface change of strip , Pawelski H. , SMS DEMAG AG; Dusseldorf, Germany
Rolling, p. 295-301. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Coupling effects in multi stand rolling mills , Grabmair G./ Schlacher K./Kugi A., Johannes Kepler University of Linz, Austria
Rolling, p. 303-310. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Mathematical modelling of a temper rolling mill , Fuchschumer S./ Schlacher K./ Kugi A. , Johannes Kepler University of Linz, Austria
Rolling, p. 311-314. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Development of the asymmetric rolling theory and technology , Pesin A.*/ Salganik V.*/ Trahtengertz E.**/ Drigun E.*** ," *Magnitogorsk State Technical University/**NP. ?Maginfocenter"; Magnitogorsk/***Join-Stock Company of Magnitogorsk Iron and Steel Works", Russia
Rolling, p. 315-321. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Analysis of the cold and hot bond rolling of clad sheet , Tzou G.-Y./ Huang M.-N./ Lee K.I./ Jian H.R./ Lion J.C. , Yung-Ta Institute of Technology, Taiwan
Rolling, p. 323-330. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Modelling of slab rolling by 3-D rigid visco-plastic finite element method , Jiang Z.Y./ Tieu A.K. , University of Wollongong, Australia
Rolling, p. 331-335. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Compositional effect on oxide scale failure during hot rolling of steel , Krzyzanowski M./ Beynon J.H. , University of Sheffield, UK
, -----------------------, -----------------------, -----------------------, ,
Special Processes, p. 337-342. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Continuous ECAE (conshearing) process of aluminum strip , Utsunomiya H./ Saito Y./ Suzuki H./ Sakai T., Osaka University, Japan
Special Processes, p. 343-348. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Partial lining of metals with thin foils using shot peening , Harada Y./ Mori K./ Hara M./ Maki S., Toyohashi University of Technology, Japan
Special Processes, p. 349-354. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A development of thixoforging using electric resistance heating, Shiomi M./ Ohnishi H./ Osakada K., Osaka University, Japan
Special Processes, p. 355-360. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Microforming - effects of miniaturization , Tiesler N./ Engel U. , University of Erlangen-Nuremberg, Germany
Special Processes, p. 361-366. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Bearing aluminium matrix composites manufactured by recycling, Gronostajski J.Z./ Chmura W., Politechnika Wroclawska, Poland
Special Processes, p. 367-372. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Experimental study of steel behaviour in process of mushy state deformation , Kotrbacek P./ Horsky J./ Raudensky M./ Ridky R. , Brno University of Technology, Czech Republic
, -----------------------, -----------------------, -----------------------, ,
Sheet forming, p. 375-378. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The effect of miniaturisation on the final geometry of the bend products , Kocanda A./ Prejs T., Politechnika Warszawska, Poland
Sheet forming, p. 379-384. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Deep drawing of double bowl kitchen sinks of stainless steel, Hakinnen E./Manninen T./ Toivanen T./ Tarkiainen R./ Korhonen A.S., Helsinki University of Technology, Finland
Sheet forming, p. 385-390. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Forming limit predictions with the perturbation method and approach in FEM simulations, Zimniak Z., Politechnika Wroclawska, Poland
Sheet forming, p. 391-396. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Necking; bursting and wrinkling in stamping and tube hydroforming, Boudeau N./ Lejeune A./ Gelin J.C. , Universite de Franche-Comte; Besancon, France
Sheet forming, p. 397-404. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Non-uniformity of plastic deformation of perforated sheet metal, Muzykiewicz W., Akademia Gorniczo-Hutnicza, Poland
Sheet forming, p. 405-410. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Bending of very thin sheets: the influence of thickness on material characterization and elastic springback , Cavaliere P. */ Gabrielli F. */ Fratini L. ** , *University of Ancona/**University of Palermo, Italy
Sheet forming, p. 411-418. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Accurate prediction of springback in sheet metal forming , Gohy S./ Papeleux L./ Collard X./ Ponthot J.-P. , Universite de Liege, Belgium
Sheet forming, p. 419-426. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., On the effectiveness of residual stresses numerical prediction in sheet bending , Filice L./ Micari F./ Fratini L. , University of Calabria, Italy
Sheet forming, p. 427-432. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The influence of a tool geometry and lubrication on a limiting thinning in the car - body sheet metal forming processes , Adamus J. , Politechnika Czestochowska, Poland
Sheet forming, p. 433-438. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Controlled laser forming of sheet metal with shape measurement and using database , Otsu M./ Osakada K./ Fujii M. , Osaka University, Japan
, -----------------------, -----------------------, -----------------------, ,
Microstructure and properties, p. 441-446. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Models for flow stress and dynamic recrystallisation of 316 stainless steel during hot forging , Zhu J./ Hartley P./ Pillinger I./ Cho J.R., University of Birmingham, UK
Microstructure and properties, p. 447-452. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Model describing grain size evolution of selected copper alloys during and after deformation, Gronostajski Z., Politechnika Wroclawska, Poland
Microstructure and properties, p. 453-459. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Behavior of the grain structure in micro sheet metal working, Eckstein R./Engel U., University of Erlangen-Nuremberg, Germany
Microstructure and properties, p. 461-468. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Modeling of ferrite microstructure refinement as a results of warm working processes, Majta J./ Bator A., Akademia Gorniczo-Hutnicza, Poland
Microstructure and properties, p. 469-475. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Verification of the numerical model of the static recrystallization of ARMCO iron , Parkitny R./ Walasek T., Politechnika Czestochowska, Poland
Microstructure and properties, p. 477-484. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Influence of hot forming on the properties of Fe-Al intermetallic materials, Szczepanik S./ Godlewska E./ Mania R., Akademia Gorniczo-Hutnicza, Poland
, -----------------------, -----------------------, -----------------------, ,
Artificial intelligence, p. 487-494. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Manufacturing of aluminum automotive piston by semi?solid forming with a statistical approach , Kim Y.H/ Choi J.C./ Park J.H./ Kwon I.K., Pusan National University, Korea
Artificial intelligence, p. 495-502. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Formalization of the information system of material management for a case study: tailored welded blank manufacturing , Tavares J.J.P.Z.S./ Batalha G.F./ Silva J.R., Escola Politecnica da USP; Sao Paulo, Brazil
Artificial intelligence, p. 503-508. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Integrating engineering design and analysis using a STEP/EXPRESS approach, Licka S./ Hruby J./ Petruzelka J., Vysoka Skola Banska-TU, Czech Republic
Artificial intelligence, p. 509-516. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Forging process design of Al-MMCs using artificial intelligence tools, Forcellese A.*/ Roberts S.M.** , *University of Ancona/**University of Cambridge, Italy /UK
Artificial intelligence, p. 517-523. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Application of AI tools to the design of superplastic forming processes , Di Lorenzo R. */ Forcellese A. ** , *University of Palermo/**University of Ancona, Italy
Artificial intelligence, p. 525-533. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The application of fractals to model material deformation , Russell L./ Hall F.R./ Davey K. , University of Wolverhampton, UK
, -----------------------, -----------------------, -----------------------, ,
Workability, p. 537-543. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Autowave mechanism of metals and alloys plasticity, Zuev L.B. */ Danilov V.I. */ Barannikova S.A. */ Zykov I.Yu*/Zavodchikov S.Yu**/ Komissarov V.A. ** , *Siberian Branch of Russian Academy of Sciences; Tomsk/**Chepetsky Mechanical Plant; Glazov, Russia
Workability, p. 545-550. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Determination of the forming limit curve by using stereo image processing , Swillo S. */ Kocanda A*./ Piela A. ** , *Politechnika Warszawska/**Politechnika Slaska, Poland
Workability, p. 551-555. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., New conception of shape and method of determining limit strain curves , Dzidowski E.S. , Politechnika Wroclawska, Poland
Workability, p. 557-562. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., An experimental and theoretical study of a forming limit curve in incremental forming of sheet metal using spherical roller , Iseki H. , Tokyo Institute of Technology, Japan
Workability, p. 563-568. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Simulation of ductile fracture behavior in shearing: effect of ductile fracture criterion , Komori K. , Daido Institute of Technology; Nagoya, Japan
Workability, p. 569-575. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Investigation into cold heading lubricants , Savage S.C./ Barnett M.R./ Hodgson P.D. , Deakin University; Geelong, Australia
, -----------------------, -----------------------, -----------------------, ,
Drawing, p. 579-584. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Development of the isothermal pass schedule program in a continuous high carbon steel wire drawing process considering the temperature drop , Kim Y.S. */ Kim D.H. */ Kim D.J. */ Kim B.M. */ Kim M.A.* * , *Pusan National University/**Hyosung Corporation; Ulsan, Korea
Drawing, p. 585-587. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Electrostimulated wire drawing and surface loss of strenght , Gromov V.E./ Tsellermaer V.Ya./ Leboshkin B.M./ Chinokalov V.Ya./ Konovalov S.V./ Gorlova S.N. , Siberian State Industrial University; Novokuznetsk, Russia
Drawing, p. 589-596. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The problem of inhomogeneity in multi-pass drawing process , Luksza J./ Majta J./ Skolyszewski A./ Bator A. , Akademia Gorniczo-Hutnicza, Poland
Drawing, p. 597-604. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A numerical investigation of the wire drawing process , Gifford R.B./ Bandar A.R./ Misiolek W.Z./ Coulter J.P. , Lehigh University, USA
Drawing, p. 605-608. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The direction of metal flow as a criterion of a floating plug geometry designing in the process of tube drawing , Hatalak R. */ Swiatkowski K. ** , *FAG; Krakow/ **Akademia Gorniczo-Hutnicza, Poland
Drawing, p. 609-613. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., The effect of cyclic torsion on the mechanical properties of drawn mild steel , Aguilar M.T.P. */ Correa E.C.S. */ e Silva A.P. */ Cetlin P.R. */ Monteiro W.A. ** , *Federal University of Minas Gerais; Belo Horizonte/**Institute for Energy Researches; Sao Paulo, Brazil
, -----------------------, -----------------------, -----------------------, ,
Forging and tools, p. 617-624. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Designing the swaging process , Grosman F./ Piela A. , Politechnika Slaska, Poland
Forging and tools, p. 625-631. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Numerical modeling of the forging process of rolls for rolling mills , Charles J.-F./ Castagne S. / Zhang L./ Habraken A.-M./ Cescotto S. , University of Liege, Belgium
Forging and tools, p. 633-639. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., A study of thermo-mechanical load of the forging dies , Lacki P. , Politechnika Czestochowska, Poland
Forging and tools, p. 641-646. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Improving the galling resistance of automotive stamping tools , Fabijanic D.M./ Barnett M./ Hodgson P.D/ Cardew-Hall M. , Deakin University; Geelong, Australia
, -----------------------, -----------------------, -----------------------, ,
Extrusion, p. 649-655. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., An approach to the modeling of extrusion of bi-metallic rods , Alexandrov S.*/ Mishuris G.**/ Miszuris W.**/ Sliwa R.E.** , *Alcoa Technical Center; Pittsburgh/**Politechnika Rzeszowska, USA / Poland
Extrusion, p. 657-662. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0.," Extrusion of Nickel-Titanium-Alloys "Nitinol" ", Muller K.B. , Technical University Berlin, Germany
Extrusion, p. 663-670. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., An innovative approach to the design of cold extrusion dies , Di Lorenzo R.*/ Filice L.**/ Micari F.** , *University of Palermo/**University of Calabria, Italy
Extrusion, p. 671-676. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Relationship between texture and metal flow in 6xxx aluminum alloys , Van Geertruyden/ W.H./ Claves S.R./ Misiolek W.Z./ Williams D.B./ Kelly R.M. , Lehigh University, USA
Extrusion, p. 677-682. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., New process design of open backward extrusion for reduced the forming load and preform design based on inference of neural network , Kim D.J. */ Kim B.M. */ Jo H.H. ** , *Pusan National University/**Korea Institute of Industrial Technology; Inchon, Korea
Extrusion, p. 683-687. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Properties of hot extruded P/M Al-Cu alloys , Sleboda T. */ Szczepanik S. */ Lehmann G. ** , *Akademia Gorniczo-Hutnicza/**TU Bergakademie Freiberg , Poland/Germany
, -----------------------, -----------------------, -----------------------, ,
Rheology and superplasticity, p. 691-698. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Analysis of material flow in stainless steel screw forming process , Packo M./ Skolyszewski A./ Malinowski Z./ Ruminski M. , Akademia Gorniczo ? Hutnicza, Poland
Rheology and superplasticity, p. 699-705. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Weight and cost reduction of machine parts by tube forming , Endou J. */ Manabe K. **/ Maruyama K. *** , *Kanagawa Institute of Technology/**Tokyo Metropolitan University/***Tube Forming Co.Ltd.; Kanagawa, Japan
Rheology and superplasticity, p. 707-712. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Finite element results of sheet superplastic forming , Mugarra A./ Alcaraz J.L. , Escuela Tecnica Superior de Ingenieros; Bilbao, Spain
Rheology and superplasticity, p. 713-717. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., FE analysis of superplastic forging of Ti alloy watch cases , Kuboki I./ Yoshida K. , Ishikawa Polytechnic College/Tokai University; Kanagawa, Japan
Rheology and superplasticity, p. 719-722. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Differential plastic flow properties of brass sheets under uniaxial and biaxial testing , Stachowicz F. , Politechnika Rzeszowska, Poland
Rheology and superplasticity, p. 723-728. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Frictional effects in the modified Couette flow of solids , Alexandrov S./ Richmond O. , Alcoa Technical Center; Pittsburgh, USA
Rheology and superplasticity, p. 729-732. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Plastic deformation at real compression rates , Jopek M. * / Forejt M. */ Buchar J. ** , *Technical University of Brno/**Mendel University of Agriculture and Forestry; Brno, Czech Republic
Rheology and superplasticity, p. 733-739. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Deformation behaviour and forming limit in press forming of thick sheet metals , Takuda H. */ Yoshii T. */ Fujimoto H. */ Mori K. ** , *Kyoto University/**Toyohashi University of Technology, Japan
Rheology and superplasticity, p. 741-745. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., An analysis of the torsional forming process using the dual stream function , Kim Y.-H. */ Jin Y.-E. */ Park J.-H. */ Lee Y. ** , *Pusan National University/**POSCO Technical Research Laboratories; Pohan, Korea
Rheology and superplasticity, p. 747-753. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., History dependent constitutive law for austenitic steels , Ordon J.*/ Kuziak R.**/ Pietrzyk M.* , *Akademia Gorniczo-Hutnicza/**Instytut Metalurgii ?elaza; Gliwice, Poland
Rheology and superplasticity, p. 755-761. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Yield criterion for orthotropic sheet metals , Banabic D./ Balan T./ Comsa D.S. , Technical University of Cluj-Napoca, Romania
, -----------------------, -----------------------, -----------------------, ,
Author index, p. 763-764. Metal Forming 2000; Pietrzyk et al. Eds. Balkema; ISBN 90 5809 157 0., Author index, , ,