ŒöŠJî•ñ‚Ì•”‰®‚Ö
ÅIXV“ú 2005”N10ŒŽ20“ú Last update: 20 Oct. 2005
“ú–{‘Y«‰ÁHŠw‰ï@ƒvƒƒZƒXEƒgƒ‰ƒCƒ{ƒƒW•ª‰È‰ï’ñ‹Ÿ Presented by The Process Tribology Committee, Tha Japan Society for Technology of Plasticity
‘æ‚W‰ñ‘Y«‰ÁH‘Û‰ï‹c(‚Q‚O‚O‚T”N‚P‚OŒŽ Verona, Italy) ‰ï‹c˜^–ÚŽŸ
8th ICTP (International Conference on Technology of Plasticity) , Verona, Italy, 9-13 Oct, 2005
Proceedings (Advanced Technology of Plasticity 2005, ISBN 88-87331-74-X) Contents
Back to Public Information page
No. of papers, Authors, Title of the paper, Source of Extended Abstract, Key words, Nationality of the organization to which the first author belongs, Remarks
8th ICTP-001, T. Altan/Y. Aue-U-Lan/H. Palaniswamy/S. Kaya, State of The Art Visions & Priorities in Research & Development on Metal Forming, Proc. 8th ICTP (2005) 3-24., Key-Notes, USA, Keynote Paper
8th ICTP-002, M. Geiger/M. Merklein/M. Tolazzi, Metal Forming Ensures Innovation and Future in Europe, Proc. 8th ICTP (2005) 25-54., Key-Notes, Germany, Keynote Paper
8th ICTP-003, M. Kiuchi, Integrated Development of Metal Forming Technologies for Ultra-Fine Grained Steel Sheets, Proc. 8th ICTP (2005) 55-70., Key-Notes, Japan, Keynote Paper
8th ICTP-004, N. Ridane/M. Kleiner/B. Heller, Enhanced Finite Element Modelling and Simulation of Air Bending, Proc. 8th ICTP (2005) 73-74., Bending, Austria, Oral Invited
8th ICTP-005, E. Hug/H. Marouani/M. Rachik, Experimental and Numerical Study of Ferromagnetic Sheet Punching: Effect of Velocity, Proc. 8th ICTP (2005) 75-76., Blanking & Bending, France, Oral Not Invited
8th ICTP-006, M. Murata/T. Kuboki, Simulation for Flat Hemming of Aluminum Sheet Metal, Proc. 8th ICTP (2005) 77-78., Blanking & Bending, Japan, Oral Not Invited
8th ICTP-007, M. Goodarzi/T. Kuboki/M. Murata, The Effect of Pushing Force on The Shear Bending Process of Circular Tubes, Proc. 8th ICTP (2005) 79-80., Bending, Japan, Oral Not Invited
8th ICTP-008, U. Dirksen/S. Chatti/M. Hermes/M. Kleiner, Closed-Loop Control System for The Three-Roll-Bending Process Based on Methods of Computational Intelligence, Proc. 8th ICTP (2005) 81-82., Bending, Germany, Oral Not Invited
8th ICTP-009, F. Sekine, Dynamic Accuracy of A Die and A Press Combined/On Blanking of Electronic Machine Parts, Proc. 8th ICTP (2005) 83-84., Blanking & Bending, Japan, Oral Not Invited
8th ICTP-010, S. Thipprakmas/M. Jin/M. Murakawa, Finite Element Simulation of Blanked Surface Features in Fine Blanking Process, Proc. 8th ICTP (2005) 85-86., Blanking & Bending, Thailand, Oral Not Invited
8th ICTP-011, K. Mori/K. Akita/Y. Abe, Springback of High Strength Steel and Aluminium Alloy Sheets in Bending Using CNC Servo Press, Proc. 8th ICTP (2005) 87-88., Bending, Japan, Oral Not Invited
8th ICTP-012, J. S. Gunasekera/V. Ranatunga, The Application of UBET in Several Metal Forming Problems, Proc. 8th ICTP (2005) 91-92., CAE & Knowledge Engineering, USA, Oral Invited
8th ICTP-013, B.A. Behrens/H. Daehndel/A. Huskic, Quality Assurance for Precision Forging Processes by Process Management and Control of Die Wear, Proc. 8th ICTP (2005) 93-94., CAE & Knowledge Engineering, Germany, Oral Not Invited
8th ICTP-014, Li Dayong/Yin Jilong/Peng Yinghong/Zhou Fei/Cao Zhaomin, Knowledge Acquisition Framework in Building A Mould & Die Design KBE System, Proc. 8th ICTP (2005) 95-96., CAE & Knowledge Engineering, China, Oral Not Invited
8th ICTP-015, Y. Mure/K. Nakanishi/M. Ogawa/Y. Nakashima, Development of A Total Integrated Support System of Die Design in Cold Forging - Measurement System of Internal Elastic Strain in A Die and Applications, Proc. 8th ICTP (2005) 97-98., CAE & Knowledge Engineering, Japan, Oral Not Invited
8th ICTP-016, O. Takata/Y. Mure/Y. Nakashima/M. Ogawa/M. Umeda/I. Nagasawa, Knowledge-Based System for Process Planning and Die Configuration Design in Cold Forging, Proc. 8th ICTP (2005) 99-100., CAE & Knowledge Engineering, Japan, Oral Not Invited
8th ICTP-017, Tadatsugu Yoshida, Development of The Modern Interface for FE Analyses of Plastic Working by The Concept of Object Oriented Programming, Proc. 8th ICTP (2005) 101-102., CAE & Knowledge Engineering, Japan, Oral Not Invited
8th ICTP-018, Y.B. Chen/Z.Y. Jiang/H.T. Zhou/A.K. Tieu/M. Yang/K. Manabe, The Influence of Difference Preprocessing Methods Using Artificial Network Shape Prediction, Proc. 8th ICTP (2005) 103-104., CAE & Knowledge Engineering, China, Oral Not Invited
8th ICTP-019, R. Di Lorenzo/V. Corona/M. Mandanici/F. Micari, A Gradient Based Technique for Costs Minimisation in Impression Die Forging, Proc. 8th ICTP (2005) 105-106., CAE & Knowledge Engineering, Italy, Oral Not Invited
8th ICTP-020, S. Kini/R. Shivpuri, A Response Surface Based FEM Approach for Improving Quality of Forging Processes, Proc. 8th ICTP (2005) 107-108., CAE & Knowledge Engineering, USA, Oral Not Invited
8th ICTP-021, L. B. Aksenov, Cold Rotary Forming of Small Module Internal Gears, Proc. 8th ICTP (2005) 111-112., Cold Forging, Russia, Oral Invited
8th ICTP-022, K. Osakada/T. Nakamura, Research and Development of Precision Forging in Japan, Proc. 8th ICTP (2005) 113-114., Cold Forging, Japan, Oral Invited
8th ICTP-023, K. Swiantkowski/R. Hatalak, Application of Modified Tools in the Process of Thin-Walled Tube Drawing, Proc. 8th ICTP (2005) 115-116., Cold Forging, Poland, Paper is missing
8th ICTP-024, A.M. Camacho/E.M. Rubio/M.A. Sebastian, Optimization of Die Shape in Drawing Processes, Proc. 8th ICTP (2005) 117-118., Cold Forging, Spain, Oral Not Invited
8th ICTP-025, K.Ito/K.Kondo, Net Shape Cold Forging of CVJ Parts and Steering Parts, Proc. 8th ICTP (2005) 119-120., Cold Forging, Japan, Oral Not Invited
8th ICTP-026, S. Kajino/M. Asakawa/T. Hatakeyama/T. Muraoka, Bar and Wire with Ultra-Smoothing and Lower Residual Stress by New Drawing, Proc. 8th ICTP (2005) 121-122., Cold Forging, Japan, Oral Not Invited
8th ICTP-027, R. Matsumoto/T. Kubo/K. Osakada, Cold Piercing of Cylindrical Billet of Magnesium Alloy Against Counter Pressure, Proc. 8th ICTP (2005) 123-124., Cold Forging, Japan, Oral Not Invited
8th ICTP-028, K. Katoh/K. Kondo/N. Hayashi, Manufacturing of Laminated Gear with Cold Die Forging Utilizing Divided Flow Method, Proc. 8th ICTP (2005) 125-126., Cold Forging, Japan, Oral Not Invited
8th ICTP-029, Y.S. Lee/J.H. Lee/Y-N. Kwon/J.R. Cho/T.Ishikawa, Analysis of The Dimensional Changes From The Die Machining to Final Heat-Treatment for Cold Forging, Proc. 8th ICTP (2005) 127-128., Cold Forging, Korea, Oral Not Invited
8th ICTP-030, F. Klocke/D. Breuer, Effect of The Surface Shape on The Cold Formability of Steel Workpieces, Proc. 8th ICTP (2005) 129-130., Cold Forging, Germany, Oral Not Invited
8th ICTP-031, K.D. Hur/H.T. Yeo, A Study on The Cold Forming of The Connecting Head for High Pressure Fuel Injection Pipe, Proc. 8th ICTP (2005) 131-132., Cold Forging, Korea, Oral Not Invited
8th ICTP-032, K. Hayakawa/T. Nakamura/S. Tanaka/T. Nozue, Detection of Damage to and Fracture of Forging Tool in Operation Using Fractal Property of Acoustic Emission, Proc. 8th ICTP (2005) 135-136., Damage & Fracture, Japan, Oral Not Invited
8th ICTP-033, H. Just/A. Behrens, Prediction of Ductile Damage in Industrial Cold and Semi-Hot Forging with Damage Models and Finite Element Simulations, Proc. 8th ICTP (2005) 137-138., Damage & Fracture, Germany, Oral Not Invited
8th ICTP-034, T. Amimoto/M. Tsubokura/K. Akiba/H. Iwamoto/H. Murakami, Study on TCP Wire Breakage by Thermo- Mechanical Stress on LCD Device, Proc. 8th ICTP (2005) 139-140., Damage & Fracture, Japan, Oral Not Invited
8th ICTP-035, C. Sommitsch/G. Ruf, Ductile Fracture Analysis with Damage Models of Effective Stresses At High Temperatures, Proc. 8th ICTP (2005) 141-142., Damage & Fracture, Austria, Oral Not Invited
8th ICTP-036, R. Di Lorenzo/A. Maniscalco/V. Corona/F. Micari, Prediction of Ductile Fracture in Bulk Metal Forming: An Artificial Neural Networks Based Approach, Proc. 8th ICTP (2005) 143-144., Damage & Fracture, Italy, Oral Not Invited
8th ICTP-037, O.S. Orlov/S.L. Winkler/M. J. Worswick/D.J. Lloyd/M.J. Finn, Damage Localization Prediction Using The Three-Dimensional Damage Percolation Model, Proc. 8th ICTP (2005) 145-146., Damage & Fracture, Canada, Oral Not Invited
8th ICTP-038, Nobuki Yukawa/Akira Koyachi/Yoshinori Yoshida And Takashi Ishikawa, Deformation Analysis of Surface Micro-Defects in Plate Rolling, Proc. 8th ICTP (2005) 147-148., Damage & Fracture, Japan, Oral Not Invited
8th ICTP-039, M. Tisza/Zs. Lukacs/G. Gal/P. Kovacs, Simulation of Multi-Step Deep-Drawing Performed in Transfer Presses, Proc. 8th ICTP (2005) 151-152., Deep Drawing, Hungary, Oral Invited
8th ICTP-040, V.Premanond/P.Kaewtatip/R.Paisarn/N.Potjamnean, Warm Deep Drawing of Ferritic Stainless Steel Sheet, Proc. 8th ICTP (2005) 153-154., Deep Drawing, Thailand, Oral Not Invited
8th ICTP-041, M. Sugamata/J. Kaneko/M. Kubota, Deep Drawing of AZ31 Magnesium Alloy Sheets At High Temperatures Under Isothermal Conditions, Proc. 8th ICTP (2005) 155-156., Deep Drawing, Japan, Oral Not Invited
8th ICTP-042, P.J. Bolt /R. Werkhoven/S. Ali/S. Hinduja/J. Atkinson, Effect of A Pulsating Blankholder on Material Flow in Deep Drawing, Proc. 8th ICTP (2005) 157-158., Deep Drawing, The Netherlands, Oral Not Invited
8th ICTP-043, B. Haddag/T. Balan/F. Abed-Meraim, Springback Prediction of Sheet Metal in The Deep Drawing Process Using Elastoplastic Phenomenological Models, Proc. 8th ICTP (2005) 159-160., Deep Drawing, France, Oral Not Invited
8th ICTP-044, Y.C. Choi/H.B. Kim/H.J. Lee/K.H. Oh, Development of Trunk Lid Outer Using Hydromechanical Deep Drawing Process (HDD), Proc. 8th ICTP (2005) 161-162., Deep Drawing, Korea, Oral Not Invited
8th ICTP-045, Z.Q. Sheng/R. Shivpuri, Investigation of A Hybrid Draw-Forging Process for Thin Walled Magnesium Parts, Proc. 8th ICTP (2005) 163-164., Deep Drawing, USA, Oral Not Invited
8th ICTP-046, Fuh-Kuo Chen /Shih-Yu Lin, Process Analysis of The Deep Drawing of Stainless Steel Rectangular Cups, Proc. 8th ICTP (2005) 165-166., Deep Drawing, Taiwan, Oral Not Invited
8th ICTP-047, T.Ohashi, Deep Drawing Die Platform Including The Multi-Point Die Support System, Proc. 8th ICTP (2005) 167-168., Deep Drawing, Japan, Oral Not Invited
8th ICTP-048, A. Kocanda/P. Czyzewski/P. Krzyszkowski, Some Developments in Analysis of Lateral Forces and Cyclic Loading with Relation to Forging Dies, Proc. 8th ICTP (2005) 171-172., Dies & Tools, Poland, Oral Invited
8th ICTP-049, R. Shivpuri/S. Babu/Y. Wu/S. Kini, Investigation of Advanced Die Materials and Gradient Surfaces for Forming Tools, Proc. 8th ICTP (2005) 173-174., Dies & Tools, USA, Oral Invited
8th ICTP-050, H. Hosokawa/K. Shimojima/M. Mabuchi, Focused Ion Beam Micro-Machining for WC-Co Cemented Carbides, Proc. 8th ICTP (2005) 175-176., Dies & Tools, Japan, Oral Not Invited
8th ICTP-051, P. Carlone/G.S. Palazzo, Experimental Investigation on The Influence of Tool Wear on Cutting Temperature in Turning Using Tungsten Carbide Inserts, Proc. 8th ICTP (2005) 177-178., Dies & Tools, Italy, Oral Not Invited
8th ICTP-052, T. Canta/A. Dragoste/D. Frunza, Researches on The Elastic Die for Forging of Gear Parts, Proc. 8th ICTP (2005) 179-180., Dies & Tools, Romania, Oral Not Invited
8th ICTP-053, C. Murata/T. Machida/S. Futamura/J. Endou," A Proposal of ""Progressive Stairs Die Working"". (Development of Direct Drive Digital Servo-Press; 2nd Report).", Proc. 8th ICTP (2005) 181-182., Dies & Tools, Japan, Oral Not Invited
8th ICTP-054, H. Moslemi Naeini/D. Javabvar/H. Amerizadeh/M. Mohammad Rezaei/A. Akbari/R. Mahshid, tool and Die Design for Non-Circular Deep Drawing Process of Aluminium Sheet by The Finite Element Simulation, Proc. 8th ICTP (2005) 183-184., Dies & Tools, Iran, Oral Not Invited
8th ICTP-055, G.A. Berti/M. Monti, A Model for The Estimation of TMF Life in Hot Forging, Proc. 8th ICTP (2005) 185-186., Dies & Tools, Italy, Oral Not Invited
8th ICTP-056, K. Dohda/H. Kubota/Y. Tsuchiya/Y. Taniguchi, Application of Hard Coatings to Ironing Dies, Proc. 8th ICTP (2005) 187-188., Dies & Tools, Japan, Oral Not Invited
8th ICTP-057, Z. Wang/H. Shiraga/N.Ueda/T. Matsumoto/M. Ohhashi/H. Nakagaki, A Simple Measurement Method of Compression Behavior of Cemented Carbide for Cold Forging Die, Proc. 8th ICTP (2005) 189-190., Dies & Tools, Japan, Oral Not Invited
8th ICTP-058, Z. Wang/I. Nakashima/M. Ohhashi/T. Matsumoto, Fatigue Crack Growth Behavior of Cemented Carbide Die in Cold Forging Process, Proc. 8th ICTP (2005) 191-192., Dies & Tools, Japan, Oral Not Invited
8th ICTP-059, N. Massue/H. Khanfir/L. Garcia-Aranda/L. Taleb/E. Arnoult, Correlation between Metallurgical Observations and Numerical Simulation of Fillet-Rollig in Crankshafts, Proc. 8th ICTP (2005) 193-194., Dies & Tools, France, Oral Not Invited
8th ICTP-060, A. Putz/U. Engel/M. Geiger, Quality Assessment of Cold Forging Tools - Measurement of The Real Prestressing by Ultrasonics, Proc. 8th ICTP (2005) 195-196., Dies & Tools, Germany, Oral Not Invited
8th ICTP-061, M. Arbak/R. Voelkl/U. Engel, Improvement of Tool Life and Working Accuracy in Cold Forging by Numerical Process Simulation, Proc. 8th ICTP (2005) 197-198., Dies & Tools, Germany, Oral Not Invited
8th ICTP-062, F. Zuttion/A. Maurizio/M. Croin/A. Ghiotti, Influence of Dies Design on The Geometrical Precision of Hot Forged Turbine Blades, Proc. 8th ICTP (2005) 199-200., Dies & Tools, Italy, Oral Not Invited
8th ICTP-063, D.Y.Yang, Computer-Aided Optimization of Metal Forming Processes As Applied to 3D Extrusion of Profiles, Proc. 8th ICTP (2005) 203-204., Extrusion, Korea, Oral Invited
8th ICTP-064, K. Hirota/K. Taguchi, Extrusion of Micro Billets From Metal Sheets, Proc. 8th ICTP (2005) 205-206., Extrusion, Japan, Oral Not Invited
8th ICTP-065, V. Mandic/S. Bruschi/T. Marinkovic/M. Zivkovic/M. Targa, FEM Simulation and Elasto-Plastic Analysis of Porthole-Die in Extrusion Hollow Section Aluminium Tubes, Proc. 8th ICTP (2005) 207-208., Extrusion, Serbia and Montenegro, Oral Not Invited
8th ICTP-066, V. Mandic/B. Misic, Stability of Steel Seam-Welded Tubes Forming Process - Experimental and Numerical Investigation, Proc. 8th ICTP (2005) 209-210., Extrusion, Serbia and Montenegro, Oral Not Invited
8th ICTP-067, Zhang Kaifeng/Han Wenbo/Wang Guofeng/Chen Guoqing, The Extrusion and Closed Die Forging Process of Nano-Structured Al2O3-ZrO2 Composite, Proc. 8th ICTP (2005) 211-212., Extrusion, China, Oral Not Invited
8th ICTP-068, D. Becker/A. Klaus/M. Kleiner, Three-Dimensional Curved Profile Extrusion, Proc. 8th ICTP (2005) 213-214., Extrusion, Germany, Oral Not Invited
8th ICTP-069, B.S. Ham/D.H. Jang/H.J. Choi/B.D. Ko/J.H. Ok/B.B. Hwang, A Study on The Forming Limit in The Radial Extrusion Process, Proc. 8th ICTP (2005) 215-216., Extrusion, Korea, Oral Not Invited
8th ICTP-070, M. Ono/E. Murai, A New Estimating Method for Void's Generation and Its Growth in Rod-Rod Combined Extrusion, Proc. 8th ICTP (2005) 217-218., Extrusion, Japan, Oral Not Invited
8th ICTP-071, W. Libura/D. Lesniak/A. Rekas/J. Zasadzinski, Physical and Numerical Modelling of Extrusion of Flat Sections From Hard Deformable Aluminium Alloys, Proc. 8th ICTP (2005) 219-220., Extrusion, Poland, Oral Not Invited
8th ICTP-072, A.G. Mamalis/G.L. Petrosyan/D.E. Manolakos/M.B. Safaryan/H.G. Petrosyan, On The Processing Through Conical Dies of Bimetallic Tubes Under Various Contact Conditions between Layers, Proc. 8th ICTP (2005) 221-222., Extrusion, Greece, Oral Not Invited
8th ICTP-073, J.H. Ok/D.H. Jang/B.S. Ham/K.H. Min/J.M. Seo/B.B. Hwang, Deformation Characteristics and Evaluation of Die Safety in Forward and Backward Can Extrusion Process Using A Tube, Proc. 8th ICTP (2005) 223-224., Extrusion, Korea, Oral Not Invited
8th ICTP-074, A. Zmudzki/M. Nylen/W.B. Hutchinson/J. Tegner/M. Pietrzyk, A Study of Material Flow Behavior During Hot Direct Extrusion of Brass, Proc. 8th ICTP (2005) 225-226., Extrusion, Poland, Oral Not Invited
8th ICTP-075, L. Donati/L. Tomesani, Extrusion Welds in Hollow AA 6060 Profiles: FEM Simulation and Product Characterization, Proc. 8th ICTP (2005) 227-228., Extrusion, Italy, Oral Not Invited
8th ICTP-076, M. Hoshino/Y. Uchida/K. Siegert, Manufacturing of Mg-Alloy Plates by Extrusion with Double Shear, Proc. 8th ICTP (2005) 229-230., Extrusion, Germany, Oral Not Invited
8th ICTP-077, J.L. Chenot/E. Massoni/E. Wey, Three-Dimensional Finite Element Modelling of New Metal Forming Processes, Proc. 8th ICTP (2005) 233-234., Forging Simulation, France, Oral Invited
8th ICTP-078, X. Shangwu/J. M. C. Rodrigues/P. A. F. Martins, Numerical Simulation of Bulk Metal Forming Processes Using The Reproducing Kernel Particle Method, Proc. 8th ICTP (2005) 235-236., Forging Simulation, USA, Oral Not Invited
8th ICTP-079, B.B. Hwang/Y.H. Lee/J.H. Ok/B.S. Ham/H.S. Koo/J.M. Seo/D.J. Kim/D.H. Jang, A Study on The 2-D Quadrilateral Mesh Generation, Proc. 8th ICTP (2005) 237-238., Forging Simulation, Korea, Oral Not Invited
8th ICTP-080, Y.H. Lee/B.B. Hwang/T.K. Ryu/D.H. Jang, An Analysis for The Improvement of Forming Process of A Steel Shell Body, Proc. 8th ICTP (2005) 239-240., Forging Simulation, Korea, Oral Not Invited
8th ICTP-081, J.T. Hong/S.R. Lee/D.Y. Yang, A New Remeshing Technique Using Tetrahedral Elements Based on A Posteriori Error Estimation and Its Application to The Finite Element Simulation of Metal Forming Processes, Proc. 8th ICTP (2005) 241-242., Forging Simulation, Korea, Oral Not Invited
8th ICTP-082, N. Biba/A. Vlasov/S. Stebounov, Automated Design and Finite Element Simulation of Reducer Rolling Technology, Proc. 8th ICTP (2005) 243-244., Forging Simulation, Russia, Oral Not Invited
8th ICTP-083, C.H. Park/D.Y. Yang, A New Conformal Hexahedral Refinement Technique for Finite-Element Simulation of Bulk Metal Forming Processes, Proc. 8th ICTP (2005) 245-246., Forging Simulation, Korea, Oral Not Invited
8th ICTP-084, D.H. Jang/B.B. Hwang, A Study on The Frictional Contact Problems in Large Deformation, Proc. 8th ICTP (2005) 247-248., Forging Simulation, Korea, Oral Not Invited
8th ICTP-085, D.H. Jang/B.B. Hwang, A Contact Detection Algorithm between Deformable Bodies in 2-D Finite Element Analysis, Proc. 8th ICTP (2005) 249-250., Forging Simulation, Korea, Oral Not Invited
8th ICTP-086, K. J. Kim/D. Y. Yang/J. W. Yoon, Rigid-Plastic Finite Element Analysis of Aluminum Extrusion Processes Based on Rate-Independent Crystal Plasticity, Proc. 8th ICTP (2005) 251-252., Forging Simulation, Korea, Oral Not Invited
8th ICTP-087, M.C. Lee/M.S. Joun, Automated Adaptive Tetrahedral Element Generation for Three-Dimensional Metal Forming Simulation, Proc. 8th ICTP (2005) 253-254., Forging Simulation, Korea, Oral Not Invited
8th ICTP-088, W.C. Xu/D.B. Shan /Y. Lu/C.F. Li, Study on The Key Problems of 3D Rigid Visco -Plastic FEM Simulation During Non-Symmetric Tube Hot Spinning, Proc. 8th ICTP (2005) 255-256., Forging Simulation, China, Oral Not Invited
8th ICTP-089, F. Piedrahita/L. Garcia Aranda/Y. Chastel, Three Dimensional Numerical Simulation of Cross Wedge Rolling of Bars, Proc. 8th ICTP (2005) 257-258., Forging Simulation, France, Oral Not Invited
8th ICTP-090, G. Hirt/M. Bambach, Modelling Incremental Sheet Forming Using A Meshless Surface Representation Based on Radial Basis Functions, Proc. 8th ICTP (2005) 261-262., Forming Simulation, Germany, Oral Invited
8th ICTP-091, H. Shim/J.K. Lee/Y.S. Kim, Automatic Generation of Initial Shape for Initiation of Optimal Blank Design Sequences, Proc. 8th ICTP (2005) 263-264., Forming Simulation, Korea, Oral Not Invited
8th ICTP-092, M.H.Parsa/S. Sokhanvaran /P. Pournia, Optimal Blank Design for Complicated Shapes Using Inverse Finite Element, Proc. 8th ICTP (2005) 265-266., Forming Simulation, Iran, Oral Not Invited
8th ICTP-093, J.H. Song/H. Huh, Draw-Bead Analysis with 3D Shell Element for The Equivalent Boundary Condition in Forming Analysis, Proc. 8th ICTP (2005) 267-268., Forming Simulation, Korea, Oral Not Invited
8th ICTP-094, Y. Peng/D. Li/Y. Luo/F. Wang, Roll Forming Simulation with Solid Shell Element, Proc. 8th ICTP (2005) 269-270., Forming Simulation, China, Oral Not Invited
8th ICTP-095, T.A. Dean, Adding Value to Forged Parts, Proc. 8th ICTP (2005) 273-274., Hot Forging, UK, Oral Invited
8th ICTP-096, W. Zhang/J. Lin And T.A. Dean, Metal Flow Characteristics When Forming on A Roll-Platen Machine, Proc. 8th ICTP (2005) 275-276., Hot Forging, UK, Oral Not Invited
8th ICTP-097, Y. Sodani/T. Kuroki/M. Miyake, High-Speed Large-Reduction Hot Forging Process for Producing Ultra-Fine Grained Steel Sheets, Proc. 8th ICTP (2005) 277-278., Hot Forging, Japan, Oral Not Invited
8th ICTP-098, M. Ozmen/O. Okman/H. Huwiler/A. E. Tekkaya, Forming of Complicated Shapes by Local Heating, Proc. 8th ICTP (2005) 279-280., Hot Forging, Turkey, Oral Not Invited
8th ICTP-099, E. Ceretti/C. Giardini/F. Brisotto, Development of A Simulation Model of The Rotary Tube Piercing Process and FEM Application to Improve The Quality of Seamless Tubes, Proc. 8th ICTP (2005) 281-282., Hot Forging, Italy, Oral Not Invited
8th ICTP-100, B.H. Zhang/Z.M. Zhang, Finite-Element Simulation on Opened-Die Forming of Spur Gear, Proc. 8th ICTP (2005) 283-284., Hot Forging, China, Oral Not Invited
8th ICTP-101, A. Buczek/T. Telejko, Determination of Heat Transfer Coefficient and Thermal Conductivity Using The Solution of Inverse Heat Conduction Problem, Proc. 8th ICTP (2005) 285-286., Hot Forging, Poland, Oral Not Invited
8th ICTP-102, M. During/L. Schaeffer/B. Viehweger, Bulk Forming of Mg-Alloys AZ31 and AZ80, Proc. 8th ICTP (2005) 287-288., Hot Forging, Germany, Oral Not Invited
8th ICTP-103, A. Minguzzi/A. Rimbano, Optimization with FEM Analysis of The Hot Forging Process of Undercarriage Components, Proc. 8th ICTP (2005) 289-290., Hot Forging, Italy, Oral Not Invited
8th ICTP-104, R. Neugebauer/A. Sterzing/M. Seifert/P. Kurka, The Potential and Application Limits of Temperature-Supported Hydroforming of Magnesium Alloys, Proc. 8th ICTP (2005) 293-294., Hydroforming, Germany, Oral Invited
8th ICTP-105, C.Y.Chuang/C.C.Huang/F.L.Ming/P.K.Cheng/M.C.Tsai, Process Limits for Exhaust Pipe Tube Hydroforming, Proc. 8th ICTP (2005) 295-296., Hydroforming, Taiwan, Oral Not Invited
8th ICTP-106, B.G. Teng/S.J. Yuan/Z.R. Wang, Research on Hydro-Bulging A 200m3 LPG Tank, Proc. 8th ICTP (2005) 297-298., Hydroforming, China, Oral Not Invited
8th ICTP-107, L. Galdos/C. Garcia, Innovative Method for Welded Tube Characterisation and Tube Hydroforming Process Modelling, Proc. 8th ICTP (2005) 299-300., Hydroforming, Spain, Oral Not Invited
8th ICTP-108, B. Viehweger/A. Karabet/A. Sviridov/M. During, Hydroforming of Magnesium Sheet Metal, Proc. 8th ICTP (2005) 301-302., Hydroforming, Germany, Oral Not Invited
8th ICTP-109, L.H.Lang/T.Li/X.B.Zhou/J.Danckert/K.B.Nielsen/S.H.Zhang/L.X.Zhou, Investigation Into The Innovative Sheet Hydroforming Methods with Uniform Pressure Onto The Blank, Proc. 8th ICTP (2005) 303-304., Hydroforming, China, Oral Not Invited
8th ICTP-110, H. Y. Kim/H. T. Lim/H. J. Kim/D. J. Lee, Comparison of 2D and 3D Prebending Effect in Aluminum Tube Hydroforming Based on The Formability Evaluation, Proc. 8th ICTP (2005) 305-306., Hydroforming, Korea, Oral Not Invited
8th ICTP-111, S.H. Zhang/L.X. Zhou/G. Palumbo/L. Tricarico/L.H. Lang/J. Danckert/K.B. Nielsen, Research on The Sheet Hydro Forming Process Using A Movable Die to Apply Local Constraints, Proc. 8th ICTP (2005) 307-308., Hydroforming, China, Oral Not Invited
8th ICTP-112, J.M. Allwood/Y. Huang/C.Y. Barlow, Recycling Scrap Aluminium by Cold-Bonding, Proc. 8th ICTP (2005) 311-312., ICEM Special Session, UK, Oral Not Invited
8th ICTP-113, H. Ono/T. Sano/Y. Nishizaki/T. Ohta/S. Ono/Y. Shirai/K. Hanada, An Environmental Evaluation of New Technology for Metal Recycling, Proc. 8th ICTP (2005) 313-314., ICEM Special Session, Japan, Oral Not Invited
8th ICTP-114, G. Gantar/E. ?Ehi?/K. Kuzman, Reduction of The Environmental Burden Caused by Household Appliances, Proc. 8th ICTP (2005) 315-316., ICEM Special Session, Slovenia, Oral Not Invited
8th ICTP-115, P. Groche/D. Fritsche, Efficient Algorithms for The Simulation of Incremental Bulk Forming Processes, Proc. 8th ICTP (2005) 319-320., Incremental Bulk Forming, Germany, Oral Invited
8th ICTP-116, M. Munshi/K. Shah/H. Cho/T. Altan, Finite Element Analysis of Orbital Forming Used in Spindle/Inner Ring Assembly, Proc. 8th ICTP (2005) 321-322., Incremental Bulk Forming, USA, Oral Not Invited
8th ICTP-117, J.M. Allwood, A Periodic Table of Ring Rolling Processes, Proc. 8th ICTP (2005) 323-324., Incremental Bulk Forming, UK, Oral Not Invited
8th ICTP-118, O. Harrer/S. Wallner/V. Wieser, Numerical Simulation of Forging Alloy 718, Proc. 8th ICTP (2005) 325-326., Incremental Bulk Forming, Austria, Oral Not Invited
8th ICTP-119, M. Pietrzyk/Z. Malinowski/W. Madej, Experimental Validation of FE Numerical Model for Ring Rolling, Proc. 8th ICTP (2005) 327-328., Incremental Bulk Forming, Poland, Oral Not Invited
8th ICTP-120, X. Yuan/Z. Pengfei/Z. Wenjun, The FEM Analysis and Optimization on The Technology Parameters of Metal Ring Cold Rolling Forming, Proc. 8th ICTP (2005) 329-330., Incremental Bulk Forming, China, Oral Not Invited
8th ICTP-121, T.Kawabe/S. Katayama, Rigid-Plastic FEM Analysis of Deformation Property in Rotary Forging, Proc. 8th ICTP (2005) 331-332., Incremental Bulk Forming, Japan, Oral Not Invited
8th ICTP-122, H.K. Moon/M.C. Lee/J.H. Chung/M.S. Joun, Finite Element Analysis of A Rotary Forging Process for Bearing Assembly, Proc. 8th ICTP (2005) 333-334., Incremental Bulk Forming, Korea, Oral Not Invited
8th ICTP-123, O. Music/V. Guley/M S. Oztop/T. Sava?/F. Ozhan/A. E. Tekkaya, Analysis of Cold Ring Rolling Process, Proc. 8th ICTP (2005) 335-336., Incremental Bulk Forming, Turkey, Oral Not Invited
8th ICTP-124, F. Lambiase/F. Capece Minutolo/M. Durante/A. Langella, A Comparison between Process Parameters in Die and Roll Drawing, Proc. 8th ICTP (2005) 337-338., Incremental Bulk Forming, Italy, Oral Not Invited
8th ICTP-125, S. Bruschi/S. Casotto/T. Dal Negro/R.Icarelli, Modelling Material Behaviour in Incremental Bulk Forming Processes, Proc. 8th ICTP (2005) 339-340., Incremental Bulk Forming, Italy, Oral Not Invited
8th ICTP-126, Q. Qin/E.S. Masuku/A.N. Bramley/A.R. Mileham/G.W. Owen, Incremental Sheet Forming - Simulation and Accuracy, Proc. 8th ICTP (2005) 343-344., Incremental Sheet Forming, China, Oral Invited
8th ICTP-127, B. Masek/H. StanKova/Z. Novy/L. W. Meyer, Development of New Incremental Forming Strategies for Low-Alloyed Trip Steels, Proc. 8th ICTP (2005) 345-346., Incremental Sheet Forming, Czech, Oral Not Invited
8th ICTP-128, R. Shankar/S. Jadhav/R. Goebel/W. Homberg/M. Kleiner, Incremental Sheet Metal Forming of Preformed Sheets, Proc. 8th ICTP (2005) 347-348., Incremental Sheet Forming, Germany, Oral Not Invited
8th ICTP-129, S.Tanaka/T.Nakamura/K.Hayakawa/H.Nakamura/K.Motomura, Incremental Sheet Metal Forming Process for Pure Titanium Denture Plate, Proc. 8th ICTP (2005) 349-350., Incremental Sheet Forming, Japan, Oral Not Invited
8th ICTP-130, G. Ambrogio/L. Filice/F. Gagliardi/F. Micari, Sheet Incremental Forming: A New Process Configuration Allowing Controlled Flow of The Sheet Material Under The Blank-Holder, Proc. 8th ICTP (2005) 351-352., Incremental Sheet Forming, Italy, Oral Not Invited
8th ICTP-131, B. Awiszus/F. Meyer, Metal Spinning of Non-Circular Hollow Parts, Proc. 8th ICTP (2005) 353-354., Incremental Sheet Forming, Germany, Oral Not Invited
8th ICTP-132, O. Sakai/S. Aida/T. Gotou/K. Magara/H. Iseki, Development of An Incremental Forming Center for Sheet Metal, Proc. 8th ICTP (2005) 355-356., Incremental Sheet Forming, Japan, Oral Not Invited
8th ICTP-133, G. Ambrogio/L. Filice, A Simple Strategy for Improving Geometry Precision in Single Point Incremental Forming, Proc. 8th ICTP (2005) 357-358., Incremental Sheet Forming, Italy, Oral Not Invited
8th ICTP-134, G. Buffa/J. Hua/R. Shivpuri/F. Micari/L. Fratini, Modeling The Effect of Pin Geometry in Friction Stir Welding of Aluminum Alloys, Proc. 8th ICTP (2005) 361-362., Joining By Forming, Italy, Oral Invited
8th ICTP-135, Y. Kasuga, Mechanical Joining of Thin Aluminum Sheets by Roll Forming and Stretching, Proc. 8th ICTP (2005) 363-364., Joining By Forming, Japan, Oral Not Invited
8th ICTP-136, H. C. Park/H. S. Jeong/J. R. Cho/Y. H. Kim /N. K. Lee, Development of Large Supealloy Valve Spindle by Inertia Welding Process, Proc. 8th ICTP (2005) 365-366., Joining By Forming, Korea, Oral Not Invited
8th ICTP-137, G. Buffa/L. Fratini, Numerical Modelling of Friction Stir Welding: A Grain Size Evolution Model, Proc. 8th ICTP (2005) 367-368., Joining By Forming, Italy, Oral Not Invited
8th ICTP-138, M. Farzin/R. Shivpuri, Joining Fasteners in The Calibration Stage of The Hydro-Forming Processes, Proc. 8th ICTP (2005) 369-370., Joining By Forming, Iran, Oral Not Invited
8th ICTP-139, G. Liu/S.J. Yuan/Q. Liu, Hydro-Joining for Assembled Camshafts and Its Applications, Proc. 8th ICTP (2005) 371-372., Joining By Forming, China, Oral Not Invited
8th ICTP-140, Y. Abe/T. Kato/K. Mori/X. Wu, Finite Element Simulation of Joining Process of Aluminium Alloy and Steel Sheets Useing Self Piercing Rivet, Proc. 8th ICTP (2005) 373-374., Joining By Forming, Japan, Oral Not Invited
8th ICTP-141, A. Barcellona/L. Fratini/D. Palmeri, Friction Stir Spot Welding of Aluminum Alloys, Proc. 8th ICTP (2005) 375-376., Joining By Forming, Italy, Oral Not Invited
8th ICTP-142, B.-A. Behrens/O. Marthiens/M. Werbs, Electromagnetic Dampening of Cutting Shocks on Presses with High Stroke Rates, Proc. 8th ICTP (2005) 379-380., Machines, Germany, Oral Invited
8th ICTP-143, V. Kru?I?/M. Arentoft/T. Rodi?, The Impact of A Mechanical Press on The Accuracy of Products in Cold Forging, Proc. 8th ICTP (2005) 381-382., Machines, Slovenia, Oral Not Invited
8th ICTP-144, D.H. Jang/Y.H. Lee/J.H. Ok/B.S. Ham/K.H. Min/H.S. Koo/Y.S. Lee/B. B. Hwang, Kinematic Analysis of Various Mechanical Press Mechanisms, Proc. 8th ICTP (2005) 383-384., Machines, Korea, Oral Not Invited
8th ICTP-145, A. Ghiotti/M. Croin/P.F. Bariani, Influence of Stiffness on Contact-Time and Temperature At Dies Surface in Hot and Warm Forging: An Experimental Approach, Proc. 8th ICTP (2005) 385-386., Machines, Italy, Oral Not Invited
8th ICTP-146, M. Pietrzyk/R. Kuziak/M. Loveday/B. Roebuck, Effect of Preheating and Testing Methods on The Flow Stress of Steels, Proc. 8th ICTP (2005) 389-390., Material Modelling, Poland, Oral Invited
8th ICTP-147, E. Koray/N. Topcu/A.E. Tekkaya, Analysis of Force-Indentation Measurements on Anisotropic Metals, Proc. 8th ICTP (2005) 391-392., Material Modelling, Turkey, Oral Invited
8th ICTP-148, F. Casari/I. Bovolo/S. Bruschi/T. Dal Negro/A. Molinari, Analysis of Hot Workability of Ni-Based Superalloy Waspaloy Through Hot Compression Tests, Proc. 8th ICTP (2005) 393-394., Material Modelling, Italy, Oral Not Invited
8th ICTP-149, C. Hwang/H. Hoffmann, A Rate-Dependent Anisotropic Behaviour of Steel Sheets, Proc. 8th ICTP (2005) 395-396., Material Modelling, Korea, Oral Not Invited
8th ICTP-150, U. Weidig/K. Bergmann/B. Scholtes/K. Steinhoff, Functionally Graded Properties by Controlled Thermo-Mechanical Interaction in Metal Forming Processes, Proc. 8th ICTP (2005) 397-398., Material Modelling, Germany, Oral Not Invited
8th ICTP-151, C. Bruni/A. Cruciani/A. Forcellese/F. Gabrielli/M. Simoncini, Flow Stress Prediction During Hot Deformation of Nimonic 115 Superalloy Using Empirical Models, Proc. 8th ICTP (2005) 399-400., Material Modelling, Italy, Oral Not Invited
8th ICTP-152, J. Yanagimoto/A. Yanagida/J.S. Liu, Analytical Model for The Prediction of Microstructure Evolution in The Hot Forming of Steel Using Severe Plastic Deformation, Proc. 8th ICTP (2005) 401-402., Material Modelling, Japan, Oral Not Invited
8th ICTP-153, J.L.Avendano/J.I.Fernandez/E.Schedin/J.Kajberg/L.Staubwasser, Implementation of A Non-Isothermal Material Model for Austenitic Stainless Steels in Deep Drawing Simulation, Proc. 8th ICTP (2005) 403-404., Material Modelling, Spain, Oral Not Invited
8th ICTP-154, S. Hansson/K. Domkin, Physically Based Material Model in Finite Element Simulation of Extrusion of Stainless Steel Tubes, Proc. 8th ICTP (2005) 405-406., Material Modelling, Sweden, Oral Not Invited
8th ICTP-155, Z. B. He/Weilong Hu/Z. R. Wang, Essential Relationship between The Metal Forming and The Invariants of Stress and Deviatoric Stress Tensors, Proc. 8th ICTP (2005) 407-408., Material Modelling, China, Oral Not Invited
8th ICTP-156, Yoshinori Yoshida/Daisuke Okushita/Nobuki Yukawa/Takashi Ishikawa, Deformation Analysis of Shaving Process of High Strength Steel, Proc. 8th ICTP (2005) 409-410., Material Modelling, Japan, Oral Not Invited
8th ICTP-157, L. Duchene/F. El Houdaigui/A. M. Habraken, Finite Element Simulations of The Swift Effect, Proc. 8th ICTP (2005) 411-412., Material Modelling, Belgium, Oral Not Invited
8th ICTP-158, K. Komori, Analysis of Luders Band in Temper Rolling by Continuum Theory of Dislocations, Proc. 8th ICTP (2005) 413-414., Material Modelling, Japan, Oral Not Invited
8th ICTP-159, F. Barlat/O. Cazacu, Modeling Plastic Anisotropy for Metal Forming, Proc. 8th ICTP (2005) 417-418., Material Testing, USA, Oral Invited
8th ICTP-160, I. Fukuda/Y. Ohishi/T. Murai, Plastic Buckling Behavior of Cylindrical Pipe of AZ31B Magnesium Alloy, Proc. 8th ICTP (2005) 419-420., Material Testing, Japan, Oral Not Invited
8th ICTP-161, K. Sugimoto/T. Muramatsu/T. Hojo/S. Hashimoto/Y. Mukai, Development of 980-1470MPa Grade Low Alloy Trip-Aided Sheet Steels for Automotive Applications, Proc. 8th ICTP (2005) 421-422., Material Testing, Japan, Oral Not Invited
8th ICTP-162, Y. Sato/T. Ueno/K. Ono/T. Nakano/T. Hasegawa/D. Hosoya, Determination of Very-High-Strain-Rate Properties of Light Metals by The Plate Impact Experiment Using Three In-Material Gauges, Proc. 8th ICTP (2005) 423-424., Material Testing, Japan, Oral Not Invited
8th ICTP-163, L.Z. He/A.K. Tieu/C. Lu/Y.B. Chen/H.T. Zhu, Deformation Behavior of A New Type Al-Mg-Si-Cu Alloy, Proc. 8th ICTP (2005) 425-426., Material Testing, Australia, Oral Not Invited
8th ICTP-164, Y.-S. Kim/S.H. Kang, Microstructural Evolution and Mechanical Properties of Ultrafine Grained Commercially Pure 1050 Aluminum Alloy Processed by Cross Accumulative Roll Bonding (C-Arb), Proc. 8th ICTP (2005) 427-428., Material Testing, Korea, Oral Not Invited
8th ICTP-165, S. Kajino/M. Asakawa, Effect of Additional Shear Strain Layer on Mechanical Properties of Fine Drawn Wire, Proc. 8th ICTP (2005) 429-430., Material Testing, Japan, Oral Not Invited
8th ICTP-166, J. Majta/M. Stefanska-Kadziela/K. Muszka/A. Bator, High Strain Rate Behavior of Microalloyed Steels for Automotive Applications, Proc. 8th ICTP (2005) 431-432., Material Testing, Poland, Oral Not Invited
8th ICTP-167, C. M. Wichern/W. Rasp, Improved Formability of Intermetallic Materials by Superimposition of Hydrostatic Pressure, Proc. 8th ICTP (2005) 433-434., Material Testing, Germany, Oral Not Invited
8th ICTP-168, S. Mizunuma, Large Straining Behavior and Micro Structure Refinement of Metals by Torsion Extrusion Process, Proc. 8th ICTP (2005) 435-436., Material Testing, Japan, Oral Not Invited
8th ICTP-169, Y. Tsuchida/M. Matsui/T. Inoue, Grain Size Refinement of Magnesium Alloys by Warm Deformation for Ductility Improvement, Proc. 8th ICTP (2005) 437-438., Material Testing, Japan, Oral Not Invited
8th ICTP-170, Kouki Mori/Eimei Nakayama/Tetsuo Sakai/Hiroshi Utsunomiya, Effect of Strain Path on Recrystallization Behavior of 1100 Aluminum Sheet, Proc. 8th ICTP (2005) 439-440., Material Testing, Japan, Oral Not Invited
8th ICTP-171, K. Aoki/A. Azushima, Mechanical Properties of Repetitive Side Extruded and Heat Treated 0.5% Carbon Steels, Proc. 8th ICTP (2005) 441-442., Material Testing, Japan, Oral Not Invited
8th ICTP-172, S.-B. Kang/J.-W. Kim/H.-W. Kim/I.-M. Park, Microstructural Evolution and Superplasticity of Al-Mg Alloys Deformed by Warm Multiple Deformation Process, Proc. 8th ICTP (2005) 443-444., Material Testing, Korea, Oral Not Invited
8th ICTP-173, U. Engel/S. Geisdorfer/M. Geiger, Simulation of Microforming Processes - An Advanced Approach Applying A Mesoscopic Model, Proc. 8th ICTP (2005) 447-448., Microforming, Germany, Oral Invited
8th ICTP-174, K . Yoshida/M . Maejima, Optimum Drawing Conditions for Shaped Microwire of 100-400um Size, Proc. 8th ICTP (2005) 449-450., Microforming, Japan, Oral Not Invited
8th ICTP-175, T. Takemasu/S. Yamasaki/H. Miura/T. Ozaki, Development of New Piercing System for Micro-Holes by Continuous Striking of A Punch Using Ultrasonic Vibration, Proc. 8th ICTP (2005) 451-452., Microforming, Japan, Oral Not Invited
8th ICTP-176, J.P. Wulfsberg/M. Terzi, Investigation and Application of Size Effects in The Laser Assisted Forging of Microparts with Transparent Tools, Proc. 8th ICTP (2005) 453-454., Microforming, Germany, Oral Not Invited
8th ICTP-177, X.Dong/N.Ma, A Study on Size Effects on Process Design of Micro Deep Drawing, Proc. 8th ICTP (2005) 455-456., Microforming, China, Oral Not Invited
8th ICTP-178, C. Wang/D. Shan/B. Guo/L. Sun, Research on Microforming Apparatus and Processes of Microgears, Proc. 8th ICTP (2005) 457-458., Microforming, China, Oral Not Invited
8th ICTP-179, H. Justinger/G. Hirt/N. Witulski, Analysis of Cup Geometry and Temperature Conditions in The Miniaturized Deep Drawing Process, Proc. 8th ICTP (2005) 459-460., Microforming, Germany, Oral Not Invited
8th ICTP-180, R. S. Lee/Y. J. Chen/S. T. Wang, Investigation of A Notched Upsetting Test for Forgeability Evaluation of Micro Parts with High Ductility, Proc. 8th ICTP (2005) 461-462., Microforming, Taiwan, Oral Not Invited
8th ICTP-181, J.H. Yoon/H. Huh /S.S. Kim/T.H. Choi /H.J. Park, Structural Analysis of A Micro-Former Based on Results From The Forming Analysis of Milli-Component, Proc. 8th ICTP (2005) 463-463., Microforming, Korea, Oral Not Invited
8th ICTP-182, H. Ike, Coining of Surface Microgeometry of Combined Cavities and Projections, Proc. 8th ICTP (2005) 465-466., Microforming, Japan, Oral Not Invited
8th ICTP-183, N. Pernin/J. Chambert/P. Picart, Micro-Forming Modelling by Using Gradient Plasticity and Surface Layer Approaches, Proc. 8th ICTP (2005) 467-468., Microforming, France, Oral Not Invited
8th ICTP-184, B.H. Kim/J.K. Shin/J.H. Ban/H.Y. Kim/J.S. Lee And J.H. Lee, Computational and Experimental Analysis of Flow Behavior of Thin Polymer Film in Spin- Coating Process, Proc. 8th ICTP (2005) 469-470., Microforming, Korea, Oral Not Invited
8th ICTP-185, S.W. Youn/H.I Kim/And C.G. Kang, A Study on Micro/Nanopattern Fabrication of Nickel and Copper by Using Nanoindenter and Electroless Deposition Technique, Proc. 8th ICTP (2005) 471-472., Microforming, Korea, Oral Not Invited
8th ICTP-186, K. Manabe/H. Koyama/H. Nouka/M. Yang/K. Ito, Finite Element Analysis of Micro Cup Drawing Process Using Tool and Blank Models with Surface Roughness, Proc. 8th ICTP (2005) 473-474., Microforming, Japan, Oral Not Invited
8th ICTP-187, Masaaki Otsu/Yukari Katayama, Micro-Bending of Magnesium Alloy Foils by Spark Forming, Proc. 8th ICTP (2005) 475-476., Microforming, Japan, Oral Not Invited
8th ICTP-188, T. Manninen/K. Kanervo/A. Revuelta/J. Larkiola/A.S. Korhonen, Plastic Deformation of Solderless Press-Fit Connectors, Proc. 8th ICTP (2005) 477-478., Microforming, Finland, Oral Not Invited
8th ICTP-189, J.C. Gelin/G. Ayad/T. Barriere/D. Renault, Optimal Design of Material and Process Parameters in Powder Injection Moulding, Proc. 8th ICTP (2005) 481-482., Powder Forming, France, Oral Invited
8th ICTP-190, Y. Kubota/T. Nakamura/S. Tanaka/K. Hayakawa/H. Nakamura/I. Motomura/T. Funato, Net Shape Forming of Dental Prosthetic Crown by DC Pulse Resistance-Sintering Process of Titanium Powder Metal, Proc. 8th ICTP (2005) 483-484., Powder Forming, Japan, Oral Not Invited
8th ICTP-191, B. Liu/T. Barriere/Z. Cheng/J.C Gelin, The Bi-Phase Simulation of Segregation in MIM and Phase Behaviours, Proc. 8th ICTP (2005) 485-486., Powder Forming, China, Oral Not Invited
8th ICTP-192, Y. Murata/E. Yuasa, Experimental Analysis of Flow; Stress and Strain Distribution in Powder Compaction, Proc. 8th ICTP (2005) 487-488., Powder Forming, Japan, Oral Not Invited
8th ICTP-193, T. Shimizu/K. Matsuzaki/K. Hatsukano/K. Hanada, Several Metal Foam Production Processes Using Powder Forming, Proc. 8th ICTP (2005) 489-490., Powder Forming, Japan, Oral Not Invited
8th ICTP-194, R. Kopp/G. Hirt/F. Jackel, Strip Profile Rolling - A New Production Process for Tailor Rolled Strips, Proc. 8th ICTP (2005) 493-494., Rolling, Germany, Oral Invited
8th ICTP-195, G. Bazzaro/N. Kapaj/M. Pavlicevic/L. Vignolo/C. Sepulveres, FE Model for Prediction of Strip Profile in Cold Rolling, Proc. 8th ICTP (2005) 495-496., Rolling, Italy, Oral Invited
8th ICTP-196, O. Pawelski, Analytical Solution of Elastic Cold Rolling of Strip As A Lower Bound for Skin Pass Rolling, Proc. 8th ICTP (2005) 497-498., Rolling, Germany, Oral Not Invited
8th ICTP-197, R. Neugebauer/U. Hellfritzsch, Innovations in Rolling Quality-Enhanced Gear Toothing, Proc. 8th ICTP (2005) 499-500., Rolling, Germany, Oral Not Invited
8th ICTP-198, S. Riljak, Prediction of Roll Force and Roll torque in Shape Rolling, Proc. 8th ICTP (2005) 501-502., Rolling, Sweden, Oral Not Invited
8th ICTP-199, H. Ona, Study on Development of Intelligent Roll Forming Machine, Proc. 8th ICTP (2005) 503-504., Roll Forming, Japan, Oral Not Invited
8th ICTP-200, C.G. Sun/J.S. Lee/S.M. Hwang, Investigation of Edge Seam Defect of Stainless Steel During Hot Plate Rolling, Proc. 8th ICTP (2005) 505-506., Rolling, Korea, Oral Not Invited
8th ICTP-201, A. Dixon/W.Y.D. Yuen, An Improved Algorithm for The Analysis of Strip Rolling with Relatively Large Roll Deformations, Proc. 8th ICTP (2005) 507-508., Rolling, Australia, Oral Not Invited
8th ICTP-202, H.T. Zhu/Z.Y. Jiang/A.K. Tieu, Cold Rolling of Ultra Thin Strip During Work Roll Edge Contract, Proc. 8th ICTP (2005) 509-510., Rolling, Australia, Oral Not Invited
8th ICTP-203, D. Wozniak, Effect of Mechanical Conditions in The Roll Gap on Closing and Welding of Material Discontinuities in Groove Rolling Process, Proc. 8th ICTP (2005) 511-512., Rolling, Poland, Oral Not Invited
8th ICTP-204, Y.Aramaki/M.Ataka/T.Okamoto, Effects of Rolling Condition As Roll Roughness; Rolling Reduction and Lubrication on Surface Appearance of Strip After Cold Skinpass Rolling, Proc. 8th ICTP (2005) 513-514., Rolling, Japan, Oral Not Invited
8th ICTP-205, X. Hong/Z. Guomin, Mathematical Model for Multi-Physical Process Coupling Analysis of Strip Hot Rolling, Proc. 8th ICTP (2005) 515-516., Rolling, China, Oral Not Invited
8th ICTP-206, L. Lissel/G. Engberg, Prediction of Microstructural Behavior During Hot Rolling, Proc. 8th ICTP (2005) 517-518., Rolling, Sweden, Oral Not Invited
8th ICTP-207, D.H.Kim/S.H.Lee/S.M.Byon/H.D.Park/B.M.Kim, Development of Width Sizing Technique with Two Steps Die in A Hot Strip Mill, Proc. 8th ICTP (2005) 519-520., Rolling, Korea, Oral Not Invited
8th ICTP-208, H. Matsumoto, Elastic-Plastic Theory of Cold and Temper Rolling, Proc. 8th ICTP (2005) 521-522., Rolling, Japan, Oral Not Invited
8th ICTP-209, M.E. English/M. Castellucci/D.J. Mynors, Achieving Feedback for Cold Roll Forming Design Automation, Proc. 8th ICTP (2005) 523-524., Roll Forming, UK, Oral Not Invited
8th ICTP-210, Hongbin Ren/A. Kiet Tieu/Cheng Lu/Hongtao Zhu/Giovanni D'Alessio, Thermal Behavior and Strip Shape in Cold Strip Rolling, Proc. 8th ICTP (2005) 525-526., Rolling, Australia, Oral Not Invited
8th ICTP-211, K. Kawai/H. Koyama/D. Miyazaki/W. Kim, Effects of Indentation Rate of Rolling Tool on The Fatigue Strength of Groove-Rolled Products, Proc. 8th ICTP (2005) 527-528., Rolling, Japan, Oral Not Invited
8th ICTP-212, S.Kaneko/K. Mori/H.Utsunomiya/T. Sakai/N. Furushiro/Y. Saito, A New Cross Rolling for Spreading of Thin Strips and Its Application for Texture Control of Aluminium, Proc. 8th ICTP (2005) 529-530., Rolling, Japan, Oral Not Invited
8th ICTP-213, S. Fukushima/T. Sasaki/M.Eto/T. Shibahara/K. Miyata/M. Wakita/Environmental Conscious Ultra-Fine-Grained Steel Consortium Of Jrcm, Development of Super Short Interval Multi Pass Rolling Technology for Ultrafine-Grained Hot Strip, Proc. 8th ICTP (2005) 531-532., Rolling, Japan, Oral Not Invited
8th ICTP-214, H. Watari/R. Paisarn/T. Haga/K. Davey/N. Koga, Characteristics of Magnesium Alloy Sheet Manufactured by Roll-Strip Casting Process, Proc. 8th ICTP (2005) 533-534., Rolling, Japan, Oral Not Invited
8th ICTP-215, F. Micari, Some Remarks on Material Formability in Single Point Incremental Forming of Sheet Metal, Proc. 8th ICTP (2005) 537-538., Sheet Metal Formability, Italy, Oral Invited
8th ICTP-216, M. Brunet/F. Morestin/H. Walter-Leberre, Forming Limit Analysis of Anisotropic Sheet-Metal Using A Non-Local Plastic- Damage Model, Proc. 8th ICTP (2005) 539-540., Sheet Metal Formability, France, Oral Not Invited
8th ICTP-217, T. Mori/S. Kurimoto, Development of Ultrafine Piercing System, Proc. 8th ICTP (2005) 541-542., Sheet Metal Formability, Japan, Oral Not Invited
8th ICTP-218, M. Merklein/S. Beccari, Influence of Predeformation on The Formability of Aluminium Alloys, Proc. 8th ICTP (2005) 543-544., Sheet Metal Formability, Germany, Oral Not Invited
8th ICTP-219, V. Psyk/C. Beerwald/W. Homberg/M. Kleiner, Extension of Forming Limits by Using A Process Combination of Electromagnetic Forming and Hydroforming, Proc. 8th ICTP (2005) 545-546., Sheet Metal Formability, Germany, Oral Not Invited
8th ICTP-220, K. Yoshida/T. Kuwabara, Experimental and Analytical Investigation on The Forming Limits of Aluminum Alloy Tube, Proc. 8th ICTP (2005) 547-548., Sheet Metal Formability, Japan, Oral Not Invited
8th ICTP-221, N. Koga/R. Paisarn/C. Kuan, Press & Blow Formability of Magnesium Foils, Proc. 8th ICTP (2005) 549-550., Sheet Metal Formability, Japan, Oral Not Invited
8th ICTP-222, R. Kawalla/S. Guk, Special Features of The Interaction of Material Properties and Deformation Conditions During Sheet Forming Processes: Microstructure Strain Localization, Proc. 8th ICTP (2005) 551-552., Sheet Metal Formability, Germany, Oral Not Invited
8th ICTP-223, M. Ishiguro/S. Maki/K. Mori, Grain Refinement of Heat Treatable Aluminum Alloy Sheets by Resistance Heat Treatment, Proc. 8th ICTP (2005) 553-554., Sheet Metal Formability, Japan, Oral Not Invited
8th ICTP-224, F. Vollertsen, Laser Induced and Laser Assisted Forming Technologies, Proc. 8th ICTP (2005) 557-558., Sheet Metal Forming Operations, Germany, Oral Invited
8th ICTP-225, M. Lindgren, Finite Element Model of Roll Forming of A U-Channel Profile, Proc. 8th ICTP (2005) 559-560., Roll Forming, Sweden, Oral Not Invited
8th ICTP-226, M. Yamashita/M. Gotoh/J. Satoh/Y. Komada, Forming of Magnesium Alloy AZ31B Sheet At Room Temperature, Proc. 8th ICTP (2005) 561-562., Sheet Metal Forming Operations, Japan, Oral Not Invited
8th ICTP-227, Z.R.Wang/B.G.Teng/Q. Zhang, Multi Point Sandwich Forming, Proc. 8th ICTP (2005) 563-564., Sheet Metal Forming Operations, China, Oral Not Invited
8th ICTP-228, Zhong-Yi Cai/Ming-Zhe Li/Xue-Song Song, Numerical Analysis of Multi-Point Forming Process of Sheet Metal, Proc. 8th ICTP (2005) 565-566., Sheet Metal Forming Operations, China, Oral Not Invited
8th ICTP-229, K. Lamprecht/M. Geiger, Advanced Numerical Modelling of Patchwork Blank Forming Processes, Proc. 8th ICTP (2005) 567-568., Sheet Metal Forming Operations, Germany, Oral Not Invited
8th ICTP-230, C. Garcia/F. Martinez, Numerical and Experimental Analyses of Pin Stiffness for Blankholder Pressure Distribution Control, Proc. 8th ICTP (2005) 569-570., Sheet Metal Forming Operations, Spain, Oral Not Invited
8th ICTP-231, A. Attanasio/E. Ceretti/C. Giardini, Comparison between Simulative and Experimental Results of Necking Operations on Aluminium Can, Proc. 8th ICTP (2005) 571-572., Sheet Metal Forming Operations, Italy, Oral Not Invited
8th ICTP-232, H. Murakami/B. Sasaki/S. Yoneoka/N. Ohtake/T. Yasuhara, Method for Preventing Dimple Defects on Sheet Metal in Boss Forming, Proc. 8th ICTP (2005) 573-574., Sheet Metal Forming Operations, Japan, Oral Not Invited
8th ICTP-233, T. Muranaka/Y. Goto/N. Ito/K. Kawachi, Improvement of Accuracies of Shape and Dimension for Cylindrical Cups Produced by Stretch - Draw Forming, Proc. 8th ICTP (2005) 575-576., Sheet Metal Forming Operations, Japan, Oral Not Invited
8th ICTP-234, Xia Qinxiang/Cheng Xiuquan/Liang Baixiang/Zhang Saijun/Ruan Feng, Analysis on The Spinning Forces for 3D Non-Axisymmetrical Thin-Walled Oblique Tubes, Proc. 8th ICTP (2005) 577-578., Sheet Metal Forming Operations, China, Oral Not Invited
8th ICTP-235, R. Krux/W. Homberg/M. Kleiner, Workpiece Properties in High-Pressure Sheet Metal Forming of Sheets with Pre-Defined Thickness Distribution, Proc. 8th ICTP (2005) 579-580., Sheet Metal Forming Operations, Germany, Oral Not Invited
8th ICTP-236, Z. Sui/C. Liu/M. Li/X. Cui, Working Surface Design and Control in Multi-Point Forming of Sheet Metal, Proc. 8th ICTP (2005) 581-582., Sheet Metal Forming Operations, China, Oral Not Invited
8th ICTP-237, Z.Y. Jiang/A.K. Tieu, 3D Finite Element Analysis of Surface Roughness and Friction in Hot Strip Rolling, Proc. 8th ICTP (2005) 583-584., Tribology, Australia, Oral Not Invited
8th ICTP-238, S. Abe/R. Hino/F. Yoshida, Optimum Drawbead Setting for Springback Control in Sheet Metal Forming, Proc. 8th ICTP (2005) 585-586., Sheet Metal Forming Operations, Japan, Oral Not Invited
8th ICTP-239, H.Palkowski/Th. Anke, Influence of Biaxial Pre-Strain on The Bake Hardening Effect and Strength of Hot Rolled Multiphase Steels, Proc. 8th ICTP (2005) 587-588., Sheet Metal Forming Operations, Germany, Oral Not Invited
8th ICTP-240, S.W. Youn/S.H. Cho/C.G. Kang, Nano/Micro-Indentation; Scratching and Atomic Force Microscopy of Rheoformed Al-Si-Mg Alloy for Characterization of Surface Deformation Behavior, Proc. 8th ICTP (2005) 591-592., Surfaces, Korea, Oral Not Invited
8th ICTP-241, Y.S. Kim/S.H. Kang/T.W. Kim, Dry Sliding Wear Characteristics of Hot- Pressure Sintered Cobalt and Cobalt-Base Composites, Proc. 8th ICTP (2005) 593-594., Surfaces, Korea, Oral Not Invited
8th ICTP-242, T.Moriya /S.Takahashi, Development of Evaluation Methodology for Surface Deflection Defects Employing Directed and Ranged Curvature Difference, Proc. 8th ICTP (2005) 595-596., Surfaces, Japan, Oral Not Invited
8th ICTP-243, A. Azushima/S. Kuba, Direct Observation of Asperity Deformation of Specimen with A Smooth Surface in Indentation Process, Proc. 8th ICTP (2005) 597-598., Surfaces, Japan, Oral Not Invited
8th ICTP-244, P. Groche/R. Schafer, Analysis of Geometrical tolerances and Surface Roughness of The Spinning Process with Regard to Size Effects, Proc. 8th ICTP (2005) 599-600., Surfaces, Germany, Oral Not Invited
8th ICTP-245, Y. Harada/S. Ujihashi/K. Mori, Shaping Fit of Hard Materials Using Shot Peening, Proc. 8th ICTP (2005) 601-602., Surfaces, Japan, Oral Not Invited
8th ICTP-246, G. DFurso/G. Pellegrini/G. Maccarini/A. Bugini, Influence of Machining Parameters on Surfacial Strain Hardening, Proc. 8th ICTP (2005) 603-604., Surfaces, Italy, Oral Not Invited
8th ICTP-247, K. Mori/S. Maki, Semi-Solid Forging of Aluminium Alloy Using Rapid Resistance Heating, Proc. 8th ICTP (2005) 607-608., Thixoforming, Japan, Oral Invited
8th ICTP-248, R. Villa/P. Giordano, Rheocasting and Squeeze Casting for Aluminium Near-Net-Shape Automotive Applications, Proc. 8th ICTP (2005) 609-610., Thixoforming, Italy, Oral Invited
8th ICTP-249, Z. Azpilgain/I. Hurtado/R. Ortubay/A. Azpiazu/G. Basterrechea, Semisolid Forging of 7000 Series Aluminium Alloys, Proc. 8th ICTP (2005) 611-612., Thixoforming, Spain, Oral Not Invited
8th ICTP-250, S. Maki/H. Shibata/K. Mori/H. Makino, Influence of Input Heat on Microstructure in Mushy State Forging of A357 Aluminum Alloy Using Resistance Heating, Proc. 8th ICTP (2005) 613-614., Thixoforming, Japan, Oral Not Invited
8th ICTP-251, Yu.A. Gladkov/Yu.A. Bocharov/R. Kopp/D. Abel, SSM-Thixoforging Process with Adaptive CNC, Proc. 8th ICTP (2005) 615-616., Thixoforming, Russia, Oral Not Invited
8th ICTP-252, R. Balendra/M. Rosochowska/K. Chodnikiewicz/R. Smith, Preliminary Assessment of The Influence of Surface Micro-Geometries on Friction, Proc. 8th ICTP (2005) 619-620., Tribology, UK, Oral Invited
8th ICTP-253, N. Bay/D.D. Olsson/J.L. Andreasen, Testing of Environmental Friendly Lubricants for Sheet Metal Forming, Proc. 8th ICTP (2005) 621-622., Tribology, Denmark, Oral Invited
8th ICTP-254, Y.T. Im/S.H. Kang/H.C. Lee/J.S. Cheon/S.Y. Kim, Novelty of Tip Test for Friction Measurement, Proc. 8th ICTP (2005) 623-624., Tribology, Korea, Oral Not Invited
8th ICTP-255, H. Pawelski, Experimental and Theoretical Evaluation of Roll Gap Friction Mechanisms in Cold Rolling, Proc. 8th ICTP (2005) 625-626., Tribology, Germany, Oral Not Invited
8th ICTP-256, P.B. Kosasih/A.K. Tieu/W.H. Li/C. Lu, The Effects of Oil Concentration and Droplet Diameter in Oil-In-Water Emulsion on Strip Rolling, Proc. 8th ICTP (2005) 627-628., Tribology, Australia, Oral Not Invited
8th ICTP-257, H.J.Jeon/A.N.Bramley, A Friction Model for Metalforming Simulation Using A Geometric Approach, Proc. 8th ICTP (2005) 629-630., Tribology, UK, Oral Not Invited
8th ICTP-258, Ken-Ichiro Mori/T. Maeno/M. Bakhshi-Jooybari/S. Maki, Measurement of Friction Force in Free Bulging Pulsating Hydroforming of Tubes, Proc. 8th ICTP (2005) 631-632., Tribology, Japan, Oral Not Invited
8th ICTP-259, D.D. Olsson/N. Bay/J.L. Andreasen, Direct Friction Measurement in Draw Bead Testing, Proc. 8th ICTP (2005) 633-634., Tribology, Denmark, Oral Not Invited
8th ICTP-260, P. Henningsen/M Arentoft/J. Lagergren/N-G Jonsson/T. Wanheim/W Precz, Normal Pressure and Friction Stress Measurement in Rolling Processes, Proc. 8th ICTP (2005) 635-636., Tribology, Denmark, Oral Not Invited
8th ICTP-261, Y. Sagisaka/T. Nakamura/S. Tanaka/K. Hayakawa, Improvement of Tribo-Testing Method Based on Combined Forward-Backward Straight Can Extrusion, Proc. 8th ICTP (2005) 637-638., Tribology, Japan, Oral Not Invited
8th ICTP-262, M. Sawamura/T. Tanaka/Y. Yogo/K. Nakanishi/T. Suzuki/A. Watanabe/N. Miyajima, Estimation of Friction and Heat Transfer At Cooling for Prediction of Hot Forging Die Life, Proc. 8th ICTP (2005) 639-640., Tribology, Japan, Oral Not Invited
8th ICTP-263, Lin Yang/Chun Liu And Rajiv Shivpuri, Comprehensive Approach to Film Formation/Pollution and Heat Transfer in Hot Die Lubrication, Proc. 8th ICTP (2005) 641-642., Tribology, USA, Oral Not Invited
8th ICTP-264, K. Kitamura/A. Shishikura/K. Tsuzuki/K. Nagata, Evaluation of Lubricants for Cold Forming of Titanium Alloy by Tapered-Plug Penetrating Test, Proc. 8th ICTP (2005) 643-644., Tribology, Japan, Oral Not Invited
8th ICTP-265, R. Kopp/M. Albaouni/R. Volles, Conical Tube-Upsetting Test ? A New Method for Accurate Determination of The Friction Coefficient, Proc. 8th ICTP (2005) 645-646., Tribology, Germany, Oral Not Invited
8th ICTP-266, B.A. Behrens/O. Vogt/J. Poelmeyer, Forming of Magnesium Sheet Metal, Proc. 8th ICTP (2005) 649-650., Warm Forming, Germany, Oral Not Invited
8th ICTP-267, M. Geiger/M. Merklein/J. Hecht, Warm Hydroforming of Magnesium Sheets - Results and Microstructural Changes, Proc. 8th ICTP (2005) 651-652., Warm Forming, Germany, Oral Not Invited
8th ICTP-268, D.K.Choo/C.G.Kang/J.H.Lee, Evaluation of Drawability At Warm and Hot Magnesium Sheet Forming with Real Time Control of Blank Holding Force, Proc. 8th ICTP (2005) 653-654., Warm Forming, Korea, Oral Not Invited
8th ICTP-269, M. Kerausch/M. Merklein, Process Analysis for Deep Drawing of Tailored Heat Treated Blanks, Proc. 8th ICTP (2005) 655-656., Warm Forming, Germany, Oral Not Invited
8th ICTP-270, Y.C.Xu/S.H.Zhang/W.T.Zheng/L.Tricarico/G.Palumbo/D.Sorgente, Investigations on The Sheet Forming of Magnesium Alloys, Proc. 8th ICTP (2005) 657-658., Warm Forming, China, Oral Not Invited
8th ICTP-271, Y. Chastel/V. Nalewajk/J. Signorelli, Warm Formability of AZ31 Magnesium Sheets, Proc. 8th ICTP (2005) 659-660., Warm Forming, France, Oral Not Invited
8th ICTP-272, M.H. Parsa/A.M.A. Pazooki/M. Nili Ahmadabadi, Tube Flow Formability Simulation, Proc. 8th ICTP (2005) 663-664., Posters: Numerical Simulation, Iran, Poster Not Invited
8th ICTP-273, M.H. Parsa/M Ghadamgahi-Kashan/A. Zarei-Hanzaki, Forging Preform Design Using Ideal Forming Theory by Considering Boundary Condition, Proc. 8th ICTP (2005) 665-666., Posters: Numerical Simulation, Iran, Poster Not Invited
8th ICTP-274, X.W. Chen/J. Chen/X.Y. Ruan, Design Optimization of Bevel Gear Forging Based on FEM Simulation and Kriging Model, Proc. 8th ICTP (2005) 667-668., Posters: Numerical Simulation, China, Poster Not Invited
8th ICTP-275, A. Torregaray/C. Garcia, Improving The Bending Process of Sheet Metal Laminates Materials, Proc. 8th ICTP (2005) 669-670., Posters: Numerical Simulation, Spain, Poster Not Invited
8th ICTP-276, B.B. Hwang/Y.H. Lee/D.H. Jang, Finite Element Analysis of The Compaction Processes for Hollow Two-Level (Class III) Components, Proc. 8th ICTP (2005) 671-672., Posters: Numerical Simulation, Korea, Poster Not Invited
8th ICTP-277, S.R. Zhang/D.Y. Li/Y.H. Peng, Texture Evolution of Sheet Metal Forming Based on Rate Independent FEM Analysis, Proc. 8th ICTP (2005) 673-674., Posters: Numerical Simulation, China, Poster Not Invited
8th ICTP-278, R. Hino/Y. Asano/F. Yoshida/V.V. Toropov, Optimization of Blank Design for Sheet Metal Forming Process Using High and Low Fidelity Simulation, Proc. 8th ICTP (2005) 675-676., Posters: Numerical Simulation, Japan, Poster Not Invited
8th ICTP-279, H. Dalayeli/M. Farzin/H. Hashemolhosseini, Metal Forming Analyses by A Rigid Plastic Meshless Collocation Method, Proc. 8th ICTP (2005) 677-678., Posters: Numerical Simulation, Iran, Poster Not Invited
8th ICTP-280, D. Vilotic/M. Plancak/K. Kuzman/D. Cupkovic, Finite Element Analysis of Cold Upsetting of Cylinder by Different Dies, Proc. 8th ICTP (2005) 679-680., Posters: Numerical Simulation, Serbia and Montenegro, Poster Not Invited
8th ICTP-281, Y.M. Guo/K. Nakanishi/Y. Yokouchi, Hot Forging Comparative Analyses by Using A Combined Finite Element Method, Proc. 8th ICTP (2005) 683-684., Posters: Bulk Metal Forming, Japan, Poster Not Invited
8th ICTP-282, P.F. Juette, tool Design and FEM Calculation for The Calibration Process, Proc. 8th ICTP (2005) 685-686., Posters: Bulk Metal Forming, Germany, Poster Not Invited
8th ICTP-283, H. Yan/M.F. Fu/Q. Hu/W. Q. Nie/Z. M. Zhong, Study on Preparation Technique of Semi-Solid AZ61 Alloy by SIMA, Proc. 8th ICTP (2005) 687-688., Posters: Bulk Metal Forming, China, Poster Not Invited
8th ICTP-284, L. Langlois/R. Bigot/L. Lazzarotto, Explosive Cladding and Sintering: Bi-Material Hot Forging Tools?, Proc. 8th ICTP (2005) 689-690., Posters: Bulk Metal Forming, France, Poster Not Invited
8th ICTP-285, D.J. Yoon/Y.W. Seo/C. Cho/K.H. Na, Characteristics of Hydrostatic Extrusion for Magnesium Alloy AZ31, Proc. 8th ICTP (2005) 691-692., Posters: Bulk Metal Forming, Korea, Poster Not Invited
8th ICTP-286, Yu. Bocharov/B. Semenov/K. Kushtarov/Yu. Gladkov/L. Khizhniakova, SSM-Thixoforging Unit Design Requirements, Proc. 8th ICTP (2005) 693-694., Posters: Bulk Metal Forming, Russia, Poster Not Invited
8th ICTP-287, T. De Vuyst/L. DFalvise/S. Beccari/L. Fratini, Infra-Red Measurement of Temperature During The Friction Stir Welding Process and Correlation with Numerical Simulation, Proc. 8th ICTP (2005) 695-696., Posters: Bulk Metal Forming, Belgium, Poster Not Invited
8th ICTP-288, C. Nagasaki, Suppression of Surface Cracking in Hot Working of Steels Containing Copper, Proc. 8th ICTP (2005) 697-698., Posters: Bulk Metal Forming, Japan, Poster Not Invited
8th ICTP-289, Y. Saotome/S. Okaniwa/H. Kimura/A. Inoue, Superplastic Nanoforging of Metallic Glass with Dies Fabricated by Focused Ion Beam, Proc. 8th ICTP (2005) 699-700., Posters: Bulk Metal Forming, Japan, Poster Not Invited
8th ICTP-290, S. Bruschi/S. Casotto/P. F. Bariani, Coupling Hot Forming and Cooling in Numerical and Physical Simulation, Proc. 8th ICTP (2005) 701-702., Posters: Bulk Metal Forming, Italy, Poster Not Invited
8th ICTP-291, P. Carlone/G.S. Palazzo/R. Pasquino, A Finite Element Analysis of The Laser Forming Process: Influence of Spot Dimension on Discretization; Temperature and Deformation Field, Proc. 8th ICTP (2005) 705-706., Posters: Sheet Metal Forming, Italy, Poster Not Invited
8th ICTP-292, Ming-Zhe Li/Zhong-Yi Cai/Chun-Guo Liu/Wen-Zhi Fu, Recent Developments in Multi-Point Forming Technology, Proc. 8th ICTP (2005) 707-708., Posters: Sheet Metal Forming, China, Poster Not Invited
8th ICTP-293, X.P. Chen/X.B. Chen/H.M. Jiang/C.H. Li/W.J. Feng/F.Z. Sun, Deforming Characteristics of GA Steel Sheet and Its Application in The Forming of Body Side Outer Panel, Proc. 8th ICTP (2005) 709-710., Posters: Sheet Metal Forming, China, Poster Not Invited
8th ICTP-294, B.F. Guo/M. Jin/Q. Li/S.M. Nie, An Approximate Analytical Model for The Calculation of Springback After Mechanical Expansion of The Cylindrical Pipes, Proc. 8th ICTP (2005) 711-712., Posters: Sheet Metal Forming, China, Poster Not Invited
8th ICTP-295, K. Inoue/M. Motomura/T. Iimura/T. Sonoda, Elucidation of Cutting Mechanism with Scissors, Proc. 8th ICTP (2005) 713-714., Posters: Sheet Metal Forming, Japan, Poster Not Invited
8th ICTP-296, M.H. Parsa/P. Darbandi, Study The Possibility of Manufacturing An Automotive Body Part Using Sheet Hydroforming Process, Proc. 8th ICTP (2005) 715-716., Posters: Sheet Metal Forming, Iran, Poster Not Invited
8th ICTP-297, M.F. Li/P.K.Cheng/C.Y.Chuang/C.C.Huang, New Development of K-Shape Aluminum Components by Means of Tube Hydroforming, Proc. 8th ICTP (2005) 717-718., Posters: Sheet Metal Forming, Taiwan, Poster Not Invited
8th ICTP-298, H.G. Jeong/W. J. Kim/D.J. Yoon/S.J. Lim/S. Choi, Room Temperature Deformation of Zr65Al10Ni10Cu15 Bulk Metallic Glass Sheet Including Nano-Sized Crystalline Phases Under Hydraulic Pressure, Proc. 8th ICTP (2005) 719-720., Posters: Sheet Metal Forming, Korea, Poster Not Invited
8th ICTP-299, H.W. Lee/G.A. Lee/S. Choi/D.J. Yoon/N.K. Lee/S.J. Lim/S.M. Bae, Experiment and Simulation-Based Studies for Enhancement of Material Strength in Cold Cross Wedge Rolling Process, Proc. 8th ICTP (2005) 723-724., Posters: Rolling, Korea, Poster Not Invited
8th ICTP-300, J. Tang/A. K. Tieu/Z.Jiang, Modelling of Oxide Scale Crack in Hot Strip Rolling, Proc. 8th ICTP (2005) 725-726., Posters: Rolling, Australia, Poster Not Invited
8th ICTP-301, T. Miki/N. Takakura/T. Iizuka/K. Yamaguchi/H. Imanishi/K. Kanayama, Feasibility of Production of Wooden Sheets From Wood Powder Without Adhesive by Rolling Process, Proc. 8th ICTP (2005) 727-728., Posters: Rolling, Japan, Poster Not Invited
8th ICTP-302, Zhang Shaohua/Xu Wei/Zhang Meng/Jin Hung, Research on The Principle of Twin Cone Rollers Axle Mill & The Calculation of The Force and Energy While Axial Rolling, Proc. 8th ICTP (2005) 729-730., Posters: Rolling, China, Poster Not Invited
8th ICTP-303, Q.F. Zhu/Z.M. Sun/F.S. Wang/W. Yao/G.C. Huang, Experimental Method for Determination of Kr Curve of Metal Plate Compact Tensile Samples, Proc. 8th ICTP (2005) 733-734., Posters: Material Modelling & Testing, China, Poster Not Invited
8th ICTP-304, T. Sakai/R. Takahashi/T. Furushima/Ken-Ichi Manabe/H. Morimoto/E. Nakamachi, Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine-Grained Pure Aluminum, Proc. 8th ICTP (2005) 735-736., Posters: Material Modelling & Testing, Japan, Poster Not Invited
8th ICTP-305, Q. Zhu/Z. Sun/F. Wang/W. Yao/G. Huang, Application of Materials Mesomechanics in Metal Materials Research, Proc. 8th ICTP (2005) 737-738., Posters: Material Modelling & Testing, China, Poster Not Invited
8th ICTP-306, H.J. Lee/H.W. Lee/N.K Lee/S.J Lim/J.H. Hwang, MEMS Material Mechanical Property Measurement Using Long Elongation Piezo Actuating Measuring System, Proc. 8th ICTP (2005) 739-740., Posters: Material Modelling & Testing, Korea, Poster Not Invited
8th ICTP-307, Y.S. Sun/Z.R. Zhang/X.T. Pan/X.T. Xiao/J.G. Hu; Y.H. Xu/Z.F. Zhou, Rapid tooling of Complicated Ceramics Based on CAD/CAE/CAM/RP, Proc. 8th ICTP (2005) 743-744., Posters: CAE & Knowledge Engineering, China, Poster Not Invited
8th ICTP-308, D. J. Mynors/P. Broomhead/R. J. Grieve, The Development of A Material Property Collection and Distribution System, Proc. 8th ICTP (2005) 745-746., Posters: CAE & Knowledge Engineering, UK, Poster Not Invited
8th ICTP-309, J.H. Lee/J.W. Kwon/Y.N. Kwon/S.W. Kim/Y.S. Lee, Experimental and FEA of Thermal Contact Conductance to Control The Surface Qualities of Al6061 Hot Forged Part, Proc. 8th ICTP (2005) 749-750., Posters: Tribology, Korea, Poster Not Invited
8th ICTP-310, Cheng Lu/A. Kiet Tieu/Hongtao Zhu/Hongbin Ren, Modeling of Asperity Ploughing At The Interface of Metal Forming, Proc. 8th ICTP (2005) 751-752., Posters: Tribology, Australia, Poster Not Invited
8th ICTP-311, Z. Malinowski/M. Rywotycki/T. Telejko, Modeling of Heat Transfer and Fluid Flow in Continuous Casting of Steel, Proc. 8th ICTP (2005) 753-754., Posters: Tribology, Poland, Poster Not Invited
8th ICTP-312, A. E. Tekkaya, Assessment and Improvement of Elementary Force Computations for Cold Forging, Proc. 8th ICTP (2005) missing, Cold Forging, Turkey, Oral Not Invited
8th ICTP-313, K.Ohga/F.Murakoshi/H.Ando/K.Miyoshi/K.Kondo, Precision Cold Die Forging of Gear Product in One Continuous Operation Using Barreled Specimens, Proc. 8th ICTP (2005) missing, Cold Forging, Japan, Oral Not Invited
8th ICTP-314," Yu.A. Bocharov/Yu.A. Gladkov/V.I.Balagansky/R.N. Prutskov/A.V.Antsyfyrovabstract Paper, Machines", Computer Simulation of Closed Gap Numerical Control and Adjustment for Hot - Die Forging Mechanical Press, Proc. 8th ICTP (2005) missing, Machines, Russia, Oral Not Invited