公開情報の部屋へ
最終更新日 1997年12月18日
日本塑性加工学会 プロセス・トライボロジ分科会提供
第５回塑性加工国際会議(1996年10月Columbus, Ohio, USA)会議録目次
5th ICTP (International Conference on Technology of Plasticity)
Proceedings (Advanced Technology of Plasticity 1996) Contents
Back to Public Information page
Authors, Title of the paper, Source, Key words, Nationality of the organization to which the first author belongs
H. Matsumoto/K. Yamada, Generalized 2-dimensional theory of flat rolling and comparison with 3-dimensional FEM, Proc. 5th ICTP (1996) 3-6, Plate rolling/Strip rolling/R-P FEM, Japan
R. Kopp/A. Hauger, Stress-oriented generation of sheet thickness profiles by means of flexible rolling, Proc. 5th ICTP (1996) 7-10, rolling, Germany
G.Y. Li/P. Huml, Improved computation of cold rolling force, Proc. 5th ICTP (1996) 11-14, strip rolling, Sweden
G.Y. Li/P. Huml, Influence of rolling speed on lubricant film thickness and friction in cold rolling, Proc. 5th ICTP (1996) 15-18, strip rolling/tribology, Sweden
J. Majta/P. Munther/J.G. Lenard/Z. Kedzierski/M. Pietrzyk, Finite-element technique applied to the simulation of thermal; mechanical and microstructural evolution during rolling of high Nb steel, Proc. 5th ICTP (1996) 19-22, hot rolling/FEM, Poland
J.J. Park, Development of a numerical method for analysis of H shape rolling process, Proc. 5th ICTP (1996) 23-26, shape rolling, Korea
M. Glowacki/Z. Malinowski/W. Madej, A comparison of three dimensional and generalized plane strain finite element models of the rolling process, Proc. 5th ICTP (1996) 27-30, plate rolling/strip rolling/E-P FEM, Poland
O. Pawelski/W. Rasp/S. Draese/P. Hafele, Influence of hydrodynamic effects and surface roughness on tribological phenomena in cold strip rolling, Proc. 5th ICTP (1996) 31-34, strip rolling/tribology, Germany
H. Yamamoto/T. Tomokiyo/S. Araya/T. Inoue/K. Watanabe, Numerical simulation of friction coefficient and surface characteristics of rolled steel sheets, Proc. 5th ICTP (1996) 35-38, strip rolling/tribology/surface roughness, Japan
J. Martin/W. Stenmanns, Process analysis of optimization when hot-rolling rings, Proc. 5th ICTP (1996) 39-52, ring rolling/hot rolling, Germany
Y.D. Kim/C.G. Kang, Numerical analysis on roll life prediction and deformation behavior in twin roll strip continuous casting process, Proc. 5th ICTP (1996) 53-56, rolling/continuous casting, Korea
Y. Washikita/T. Ooi/S. Kamada, Advanced shape control technologies for Kashima No. 2 cold tandem mill, Proc. 5th ICTP (1996) 57-66, strip rolling/tandem mill/shape control, Japan
T. Yoneyama/A. Fujita/S. Yoshida/I. Hoshino/M. Kokubo, Measurement of temperature and heat flux on the roll surface in hot rolling of aluminum sheets, Proc. 5th ICTP (1996) 67-70, hot rolling/tribology/temperature measurement, Japan
J. Tateno/Y. Watanabe/K. Kenmochi/I. Yarita/S. Katsura/Y. Seino/Y. Izumiyama, Flatness control in the 12-high cluster mill of wide stainless steel strips, Proc. 5th ICTP (1996) 71-74, strip rolling/shape control, Japan
, 5th ICTP-015, A.B. Lopes/J. J. Gracio/E.F. Rauch, The effect of grain size on the microstructural evolution of low carbon steel deformed in rolling, Proc. 5th ICTP (1996) 75-78, strip rolling/microstructure, Portugal
J. Edberg/P. Mantyla, A flow stress model for finite element simulations of hot rolling, Proc. 5th ICTP (1996) 79-82, hot rolling/FEM, Sweden
G.Y. Tzou/ Y.M. Hwang, Analysis and experiment on asymmetrical sheet rolling, Proc. 5th ICTP (1996) 83-86, strip rolling, Taiwan
I. Yasuzumi, Study of behavior of the end part of strip while being coiled up, Proc. 5th ICTP (1996) 87-90, strip rolling/coiling, Japan
, 5th ICTP-019, H. Cho/N. Kim, A study on the microstructural evolution in hot rolling, Proc. 5th ICTP (1996) 91-94, hot rolling/R-P FEM, Korea
H. Yoshimura/K. Osakada/K.I. Mori, Simplified three-dimensional analysis of rotary piercing of pipe by rigid- plastic finite element method, Proc. 5th ICTP (1996) 95-98, tube rolling/rotary piercing/R-P FEM, Japan
H. Utsunomiya/Y. Saito/K. Hirata/T. Kawamoto/K. Oka, Rolling of profiled wires by the satellite mill, Proc. 5th ICTP (1996) 99-102, shape rolling, Japan
T. Jonsater/H. Keife, Simulation of foil rolling including thermal effects, Proc. 5th ICTP (1996) 103-106, foil rolling, Sweden
K. Dohda/Z. Wang/N. Yokoi/Y. Haruyama, Effects of average traction velocity of lubricant and relative sliding velocity on friction behavior in mild steel sheet rolling, Proc. 5th ICTP (1996) 107-110, strip rolling/tribology, Japan
K. Aoki/H. Ohta/A. Azushima, Development of the microscopic analysis for roll coating by collimated x-ray diffraction, Proc. 5th ICTP (1996) 111-114, strip rolling/tribology/measurement, Japan
S. Ban/T. Sasaki/T. Kono/K. Sakagami/T. Kita/K. Kimura, Development and application of mathematical width models for the hot strip finishing train, Proc. 5th ICTP (1996) 115-118, hot rolling/strip rolling/shape control, Japan
O. Ghouati /J.C. Gelin, Modelling hot rolling of aluminium alloys using constitutive equations obtained from plane strain compression tests, Proc. 5th ICTP (1996) 119-122, hot rolling/E-P FEM, France
H. Ike/W.J. Qian, Fabrication of 3-D controlled surface microgeometry on aluminum sheets by passive rolling, Proc. 5th ICTP (1996) 123-126, temper rolling, Japan
Y. Matsuda/S. Hashimoto/T. Kajihara/T. Kaneko/R. Hamada/ S. Iyama, Advanced technology of pair cross mill for reducing edge drop of cold- rolled strip, Proc. 5th ICTP (1996) 127-130, Strip rolling/shape control, Japan
K. Yasuda/K. Narita/Y. Takakura/S. Yasunari, Shape control models of a new 6-high mill (UC-1F Mill) including a direct effect factor for horizontal work roll deflection on strip flatness, Proc. 5th ICTP (1996) 131-134, Strip rolling/shape control, Japan
T. Sakai/Y. Hayashi/Y. Saito, Consolidation of gas atomized AISI304 powder sheathed in AISI304 tube by high speed hot rolling, Proc. 5th ICTP (1996) 135-138, hot rolling/Consolidation, Japan
W. Razny/ F.D. Fischer/W. Schwenzfeier, Comparison of rolling theories with 3D numerical simulation, Proc. 5th ICTP (1996) 139-142, hot rolling/strip rolling/FEM, Austria
J.Z. Xu/Z.M. Zhou/D. Wu/G.R. Bai, Rigid-plastic FEM analysis of metal forming for rolling shape slab, Proc. 5th ICTP (1996) 143-146, shape rolling/R-P FEM, China
L. Zhao/G.R. Bai, Research on asymmetric and cross rolling, Proc. 5th ICTP (1996) 147-150, cross rolling/strip rolling, China
C.H. Luo/ D.S. Peng/Z.H. Xu, Numerical modelling of cold-roll bonding of clad metal sheets, Proc. 5th ICTP (1996) 151-154, cold rolling/bonding/pressure welding, China
V.A. Matviichuk/V.D. Pokras, Design of cold roll-forging of compressor blades based on workability analysis, Proc. 5th ICTP (1996) 155-158, rolling/cold forging/rotary forging, Ukraine
Y. Huang/Y.X. He/J.T. Han/C.S. Zhong/J.R. Zhou/H.X. Xu/Q. Li, Discussion with the mechanism of entry strip bending effects on rolling force and surface quality, Proc. 5th ICTP (1996) 159-162, cold rolling/strip rolling, China
R.D. Jiang/Y.X. He/J.T. Han, Object-oriented technique and its application in the simulation of cold strip rolling, Proc. 5th ICTP (1996) 163-166, hot rolling, China
X.J. Guan/X.J. Wang/D.C. Wang/P.H. Feng/X.G. Zhu, Effects of hot rolling finishing temperature on the microstructures and properties of extra low-carbon high strength steel sheet with bake-hardenability, Proc. 5th ICTP (1996) 167-170, hot rolling/microstructure, China
D.Q. Jin/V.H. Hernandez/C.A. Muojekwu/I.V. Samarasekera/J.K. Brimacombe, Computer modelling of thermal; deformation and microstructural evolution during hot rolling of steel, Proc. 5th ICTP (1996) 171-182, hot rolling/V-P FEM/microstructure, Canada
B. Stok/A. Mihelic, Optimal design of multi-step extrusion/drawing processes, Proc. 5th ICTP (1996) 185-188, extrusion/drawing, Slovenia
W. Misiolek, Microstructure control by means of metal flow in aluminum extrusion, Proc. 5th ICTP (1996) 189-192, extrusion/microstructure, USA
V. Pokras/ M.A. Rvachev, Analysis of extrusion processes with R-functions method, Proc. 5th ICTP (1996) 193-196, extrusion, Ukraine
M. Plancak/D. Vilotic/V. Vujovic, One contribution to the investigation of gear extrusion, Proc. 5th ICTP (1996) 197-200, extrusion, Yugoslavia
D.C. Ko/T.H. Kim/B.M. Kim/J.C. Choi, A new approach and criterion for the prediction of central burst defects in extrusion and wire drawing, Proc. 5th ICTP (1996) 201-204, extrusion/drawing/fracture, Korea
M. Sato/K. Yoshida/ H. Tanaka, Wall-thickness variation by abnormal tube-sinking, Proc. 5th ICTP (1996) 205-208, tube drawing/shape control, Japan
K. Yoshida/M. Sato/H. Tanaka, Internal fracture in drawn clad wire and detection by acoustic emission, Proc. 5th ICTP (1996) 209-212, wire drawing/fracture/AE/clad material, Japan
, 5th ICTP-047, Z.P. Lin/N. Lin, A study on determination of pressure distribution over die surface by combining upper bound method with slab method, Proc. 5th ICTP (1996) 213-216, extrusion/contact pressure distribution/Upper Bound method/Slab method, China
Y.M. Hwang/Y.C. Tsai, Study on hydrostatic extrusion of composite rods, Proc. 5th ICTP (1996) 217-220, hydrostatic extrusion/composite material, Taiwan
E. Ceretti/C. Giardini/G. Maccarini/A. Bugini, Direct extrusion: influence of die geometry and friction on final part quality, Proc. 5th ICTP (1996) 221-224, extrusion/tribology, Italy
H. Dyja/ J.W. Pilarczyk/W. Szulc/Z. Smolarczyk, Drawing of bimetal wires - draw stresses and wire properties, Proc. 5th ICTP (1996) 225-228, wire drawing/composite material, Poland
W. Libura, Effect of die geometry on strain and stress distribution during plane strain extrusion, Proc. 5th ICTP (1996) 229-232, extrusion/visioplasticity, Poland
D. Damodaran/R. Shivpuri, Improving tolerances of Ti64 extrudates by control of metal flow through die design, Proc. 5th ICTP (1996) 233-238, extrusion, USA
M. Murakawa/ M. Jin, Manufacture of precision aluminum tubes used as photosensitive drums by the extrusion & drawing method using ultrasonic vibration, Proc. 5th ICTP (1996) 239-242, extrusion/drawing/ultrasonic vibration, Japan
M. Arentoft/C. Vigso/M. Lindegren/ N. Bay, A study of the double cup extrusion process as a friction test, Proc. 5th ICTP (1996) 243-250, extrusion/friction/tribology, Denmark
M. Ohmori/Y. Harada/ M. Yoshida, Effect of pressurization on extrusion workability of chromium, Proc. 5th ICTP (1996) 251-254, extrusion/sintering/pressurization, Japan
K. Hanada/Y. Murakoshi/H. Negishi/T. Sano, Extrusion processing of aluminum-lithium/SiCp composite produced by mechanical milled powders, Proc. 5th ICTP (1996) 255-258, extrusion/powder/microstructure, Japan
T. Kawabe/T. Kato/T. Wada, Dimensional accuracy of products during repeated backward cold extrusion , Proc. 5th ICTP (1996) 259-262, backward extrusion/cold extrusion/accuracy, Japan
K. Nakanishi/H. Kinoshita/S. Kamitani/Y.M. Gou, Experimental investigation on thermal control method for metal flow control in hot extrusion of Al-alloy, Proc. 5th ICTP (1996) 263-266, hot extrusion/clad material, Japan
M. Hoshino/M. Kiuchi, Manufacturing of clad metal sheets and clad metal T sections by multi-billet extrusion, Proc. 5th ICTP (1996) 267-270, extrusion, Japan
X. Ruan/Y. Peng/L. Wang/X. Li, The FEM simulation of bimetal forming process, Proc. 5th ICTP (1996) 271-278, extrusion/R-P FEM/composite material, China
R. Shivpuri/P. Pauskar, Computer aided prediction of properties in forging of microalloy steels, Proc. 5th ICTP (1996) 281-286, forging, USA
J.M. Pitt-Francis/ A. Bowyer/A.N. Bramley, A shape approximation technique for forging modelling, Proc. 5th ICTP (1996) 287-290., forging, UK
R. Balendra/ H. Ou, Influence of forming press elasticity on the accuracy of formed components, Proc. 5th ICTP (1996) 291-294, forging machine/accuracy, UK
F.H. Osman/E. Merrygold, Effect of differential heating on modes of plastic deformation in forming processes, Proc. 5th ICTP (1996) 295-298, forging/new forming process, UK
, 5th ICTP-065, D.J. Kim/B.M. Kim/J.C. Choi, Determination of optimal billet size using the artificial neural networks and the finite element method for a forged product, Proc. 5th ICTP (1996) 299-302, hot forging/neural network/FEM, Korea
S. Sun/Y.G. Luan, Backward simulation with related techniques based on UBET and its application in precision forging process, Proc. 5th ICTP (1996) 303-306, forging/UBET, China
, 5th ICTP-067, F. Dohmann/P. Wiebe, Extrusion of workpieces with toothed functional surfaces, Proc. 5th ICTP (1996) 307-310, extrusion, Germany
N. Bay/J. Hunding/K. Kuzman/E. Pfeifer, Testing of friction in cold forging by combined forward rod/backward cup extrusion, Proc. 5th ICTP (1996) 311-318, forward extrusion/backward extrusion/tribology/friction, Denmark
P. Li/D. Li/J. Tan/S. Li/X. Zheng, Dynamic response of forming processes in a screw press, Proc. 5th ICTP (1996) 319-322, forging machine/extrusion press/press machine, China
T. Nakamura/S. Tanaka/M. Hiraiwa/H. Imaizumi/S. Suzuki, Powder forging with sintering and chemical reaction between copper and aluminum elemental powders, Proc. 5th ICTP (1996) 323-326, powder forging/sintering, Japan
R. Balendra/Y. Qin, Technical feasibility and processing limitations of pressure-assisted injection forging of thick-walled tubes, Proc. 5th ICTP (1996) 327-330, forging/upsetting/bulge forming/tube forming, UK
K. Ohga/F. Murakoshi/H. Ando/K. Kondo, Precision cold die forging of actual steel gear toothed products utilizing divided flows, Proc. 5th ICTP (1996) 331-334, cold die forging, Japan
A. Rosochowski/R. Balendra, Secondary yielding - experimental verification, Proc. 5th ICTP (1996) 335-338, plasticity theory/yield criterion, UK
, 5th ICTP-074, T. Tatenami, F.E.M. simulation for rigid plastic materials by dependent displacement method, Proc. 5th ICTP (1996) 339-342, R-P FEM, Japan
H. Saiki/G. Ngaile/L. Ruan/M. Asakawa, New tribo-test for cold forging processes by localized rod-drawing method, Proc. 5th ICTP (1996) 343-346, tribology/forging/drawing, Japan
R. Kopp/T. Beckmann, Open die forging with a six-axis robot as forging manipulator, Proc. 5th ICTP (1996) 347-350, open die forging/forging machine, Germany
K.I. Mori/M. Shiomi/K. Osakada, Analysis of powder compaction by rigid-plastic finite element method based on Cosserat Continuum Theory, Proc. 5th ICTP (1996) 351-354, powder compaction/R-P FEM, Japan
M. Shiomi/J.H. Xu/K.I. Mori/K. Osakada, Three-dimensional finite element simulation of buckling behaviour of slab in width-sizing process, Proc. 5th ICTP (1996) 355-358, forging/sizing/R-P FEM, Japan
Y.M. Guo/Y. Yokouchi/K. Nakanishi/S. Kamitani, Prediction of final shape of die hot forging product by the finite element method, Proc. 5th ICTP (1996) 359-362, hot die forging/R-P FEM, Japan
H. Yano/T. Akashi/M. Ogino/K. Nakanishi/O. Takata/N. Horinouchi, Application of CAPD - Development aiding technology and application example, Proc. 5th ICTP (1996) 363-366, forging/numerical simulation, Japan
A. Kocanda/R. Cacko/P. Czyzewski, Some aspects of die deformation in net-shape cold forging, Proc. 5th ICTP (1996) 367-370, cold forging/elastic deformation, Poland
B.S. Kang/H.H. Choi/J.H. Lee, Process design in coining by the three-dimensional backward tracing scheme of the rigid-plastic FEM, Proc. 5th ICTP (1996) 371-380, forging/coining/R-P FEM, Korea
N. Yukawa/M. Okatsu/K. Ohkawa/T. Ishikawa/T. Jimma, Three dimensional rigid plastic FEM analysis with adaptive remeshing method, Proc. 5th ICTP (1996) 381-384, R-P FEM/die forging, Japan
T. Shimizu/T. Sano, Development of a 3D metal forming simulator using a penalty method contact algorithm and its connecting with CAD system, Proc. 5th ICTP (1996) 385-388, R-P FEM, Japan
A. Minami/H. Saiki, Effect of surface hardening by nitriding on thermal softening and deterioration of dies in warm and hot forging, Proc. 5th ICTP (1996) 389-392, warm forging/hot forging/surface treatment/tribology, Japan
A. Behrens/H. Schafstall/D. Landgrebe, Automated FEM-simulation of complex multistage forging processes by use of adaptive friction coefficient, Proc. 5th ICTP (1996) 393-396, forging/FEM/tribology/friction, Germany
K. Nakanishi/Y. Mure, Forging process design aided by physical forming simulation system, Proc. 5th ICTP (1996) 397-400, forging/process design/physical simulation, Japan
Y. Kurosaki/M. Matsui, Application of fractal analysis to adhesion phenomena in metal forming, Proc. 5th ICTP (1996) 401-404, fractal/tribology, Japan
U. Engel, " ""A priori"" - analysis of tool reliability ", Proc. 5th ICTP (1996) 405-408, tool life, Germany
Y.K. Lee/D.Y. Yang, A new automatic mesh generation technique and its application to the finite element analysis of practical forging process, Proc. 5th ICTP (1996) 409-413, forging/FEM, Korea
Y.B. Park/D.Y. Yang, Application of recurrent boundary condition to finite element analysis of three-dimensional forming with twisted shapes, Proc. 5th ICTP (1996) 415-418, forging/FEM, Korea
Y. Peng/X. Ruan/F. Zhou/Z.Y. Wang, Defects prediction during metal forming process by FEM, Proc. 5th ICTP (1996) 419-428, R-V-P FEM/forging/neural network, China
K. Osakada/S. Hanami/X. Wang, Net shape forging process with axially driven container, Proc. 5th ICTP (1996) 429-432, forging, Japan
H. Kim/T. Yagi, Estimation of dimensional differences between cold forgings and tools in backward cup extrusion of steels, Proc. 5th ICTP (1996) 433-436, cold forging/backward extrusion/shape control, Japan
Y. Nagai/Y. Uchida, The trial for forming of a spur gear made from the drawn cup, Proc. 5th ICTP (1996) 437-440, deep draw/ironing/forging, Japan
P.F. Bariani/G. Berti/L. D'Angelo/R. Guggia, Complementary aspects in physical simulation of hot forging operations, Proc. 5th ICTP (1996) 441-444, hot forging/physical simulation, Italy
M. Bellet/L. Fourment, A finite element three-field formulation to model the hot forging of metal powders, Proc. 5th ICTP (1996) 445-448, FEM/hot forging/powder forming, France
L. Fourment/T. Balan/J.L. Chenot, A software for preforming tools optimization in forging, Proc. 5th ICTP (1996) 449-452, hot forging/FEM, France
, 5th ICTP-099, G. Zhao/E. Wright/R. Grandhi, Preform design in bulk forging processes, Proc. 5th ICTP (1996) 453-456, die forging, USA
H. Saiki/Z. Zhan/Y. Marumo/H. Ando, Evaluation of thermal contact resistance in hot and warm forging, Proc. 5th ICTP (1996) 457-460, hot forging/warm forging/Tribology, Japan
K. Siegert/M. Meidert, Cold forming of superplastic preformed aluminum parts, Proc. 5th ICTP (1996) 461-464, superplasticity/blow forming, Germany
J.L. Chenot/T. Coupez/L. Fourment/R. Ducloux, 3-D finite element simulation of the forging process: scientific developments and industrial applications, Proc. 5th ICTP (1996) 465-474, FEM/forging, France
P. Marin/C. Le/S. Tichkiewitch, Taking into account thermal effects in ForgeRond; a fast hot-forging simulation tool, Proc. 5th ICTP (1996) 475-478, hot forging/numerical simulation, France
G.J. Li/W.T. Wu/A. Arvind/J.P. Tang, 3D finite element analysis of industrial metal forming processes, Proc. 5th ICTP (1996) 479-484, forging/R-P FEM, USA
S. Sheljaskov, Warm forging - a technology for manufacturing of precision components, Proc. 5th ICTP (1996) 485-490, warm forging, Germany
M. Kiuchi/K. Abe/R. Onodera, Computerized numerical simulation of roll forming process, Proc. 5th ICTP (1996) 493-496, roll forming/numerical simulation, Japan
S. Fuchizawa/M. Narazaki/A. Shirayori, Bulge forming of aluminum alloy tubes by internal pressure and axial compression, Proc. 5th ICTP (1996) 497-500, tube expanding/tube forming, Japan
M. Nakamura/S. Maki/M. Nakajima/K. Hayashi, Bending of circular pipe using a floating spherical expanding plug, Proc. 5th ICTP (1996) 501-504, tube bending, Japan
M. Murata/Y. Aoki, Analysis of circular tube bending by MOS bending method, Proc. 5th ICTP (1996) 505-508, tube bending, Japan
S. Sakaki, Deformation and working limit of extruded square tubes in bending process, Proc. 5th ICTP (1996) 509-512, tube bending, Japan
K. Lange/D. Kang/K. Pohlandt, Effect of radial anisotropy on forming behavior of tubes, Proc. 5th ICTP (1996) 513-518, tube forming/constitutive equation, Germany
X. Wang/J. Shi/T. Chen, Development of expert system of roll form design, Proc. 5th ICTP (1996) 519-522, roll forming, China
D. Schmoeckel/B. Sitzmann, Computer aided pass sequence planning for roll forming using the finite element simulation, Proc. 5th ICTP (1996) 523-526, roll forming /FEM, Germany
J. Tirosh/A. Neuberger/A. Shirizly, " Tube expansion with ""unlimited"" strain ", Proc. 5th ICTP (1996) 527-530, tube forming/tube expanding, Israel
K.I. Kawai/H. Kudo/T. Endo, Rotary forming of tapered internal threads, Proc. 5th ICTP (1996) 533-536, rotary forming, Japan
T. Mori/Y. Saito, " Development of new tube-forming ""Planetary Conical Rolling"" ", Proc. 5th ICTP (1996) 537-546, rotary forming/tube forming, Japan
E. Doege/V. Deac/M.I. Rotarescu, Experimental research and FEM analysis of steel behavior during tube flow-turning using balls, Proc. 5th ICTP (1996) 547-552, rotary forming/FEM, Germany
M. Saito, Micro-spinning technology for tubular products, Proc. 5th ICTP (1996) 553-556, spinning, Japan
S. Shima/H. Kotera/H. Murakami/N. Nakamura, Development of flexible spinning- A fundamental study, Proc. 5th ICTP (1996) 557-560, spinning, Japan
K. Kondo/K. Hirota, " Research on the extension of applicability in ""opposed die shearing process"" ", Proc. 5th ICTP (1996) 563-566, shearing, Japan
F. Vollertsen, Flexible extrusion bending process, Proc. 5th ICTP (1996) 567-570, extrusion/bending, Germany
N. Koga/M. Murakawa, Application of visioplasticity to experimental analysis of shearing phenomena, Proc. 5th ICTP (1996) 571-574, shearing/measurement/visioplasticity, Japan
H. Ogawa/A. Makinouchi/N. Mori/H. Takizawa, Proposal of new air bending method for obtaining high accuracy based on FEM analysis, Proc. 5th ICTP (1996) 575-578, bending/FEM, Japan
T. Oenoki/T. Otani, Development of highly accurate bending system with the bend angle sensor, Proc. 5th ICTP (1996) 579-582, bending/shape control, Japan
T. Takahashi/I. Aoki, Development of analyzing system applicable for large plastic deformation, Proc. 5th ICTP (1996) 583-590, displacement measurement/shearing, Japan
L. Iuliano/S. Olivero/G. Opitz/G. Perotti/M. Stricker, Progress in two-stage shearing, Proc. 5th ICTP (1996) 591-594, shearing, Italy
F. Sekine/N. Enomoto, Dynamic accuracy of die affected by eccentric load - comparing ball-guide and roller-guide -, Proc. 5th ICTP (1996) 595-598, press machine/shape control, Japan
Y. Yokouchi, Prediction of deformed cross section in pure bending, Proc. 5th ICTP (1996) 599-602, bending/plasticity theory, Japan
S. Suto/M. Takahashi/T. Sano, Effect of boron addition on the bending properties of intermetallic Ni3Al sheet, Proc. 5th ICTP (1996) 603-606, intermetallic material/bending, Japan
K.B. Nielsen/J. Danckert, Sensitivity based optimization of stretch bending, Proc. 5th ICTP (1996) 607-610, stretch bending/tube bending, Denmark
M. Yoshino/T. Shirakashi/T. Shiraishi, FEM simulation of residual stresses in 3-point bending test based on extended thermo-elasto-plastic theory, Proc. 5th ICTP (1996) 611-614, bending/thermo-elasto-plastic theory, Japan
M. Murata/F. Arakawa/ T. Altan/A. Muderrisoglu, Experimental examination sheet metal hemming, Proc. 5th ICTP (1996) 615-618, bending, Japan
M. Yang/K.I. Manabe/H. Nishimura, Application of database to precision process control for V-bending of sheet metal, Proc. 5th ICTP (1996) 619-622, bending/shape control, Japan
O. Hasegawa/H. Nishimura, Formability of aluminum alloy extruded shapes in press bending, Proc. 5th ICTP (1996) 623-626, section bending, Japan
G. Yang/ K. Osakada/K.I. Mori, Analysis of plane-strain bending of plates by local heating, Proc. 5th ICTP (1996) 627-630, bending/heating, Japan
S.H. Jeong/ J.J. Kang/S.I. Oh, A study on shearing mechanism by FEM simulation, Proc. 5th ICTP (1996) 631-634, shearing/R-P FEM, Korea
L. Liu/T. Sawada/M. Sakamoto, Surface deflection of sheet metal measured by the reflection of line grating , Proc. 5th ICTP (1996) 635-638, measurement/surface deflection/shape control, Japan
S. Yanagi/Y. Maeda/ S. Hattori, Residual stress of thin strip after leveling process, Proc. 5th ICTP (1996) 639-644, leveling/residual stress, Japan
F. Faura/ A. Garcia/J. Lopez/M.A. Sebastian, Blanking of stainless steel: Criteria of wear limitation, Proc. 5th ICTP (1996) 645-654, shearing/wear, Spain
F. Faura/J. Lopez/ M.A. Sebastian/C. Luis, Blanking of stainless steel: tool life equation model, Proc. 5th ICTP (1996) 655-664, shearing/wear, Spain
D. Brokken/W.A.M. Brekelmans/F.P.T. Baaijens, Numerical analysis of the metal blanking process, Proc. 5th ICTP (1996) 665-668, shearing/blanking/fracture, Netherlands
J.H. Liu/A. Tuz/M.A. Ahmetoglu/T. Altan, Viscous pressure forming (VPF) of sheet metal alloys - FEM simulations and experiments, Proc. 5th ICTP (1996) 671-674, hydrostatic forming/bulging/FEM, USA
M. Kawka/A. Makinouchi, Improvements in a shell element formulation for accurate prediction of sheet metal forming defects, Proc. 5th ICTP (1996) 675-678, SMF/E-P FEM/deep drawing, Japan
Y. Marumo/H. Saiki, Estimation of the deep-drawability of square cups (Influence of blank shape; blank material and tool shape on the deep-drawability), Proc. 5th ICTP (1996) 679-682, SMF/deep drawing, Japan
S.P. Wang/E. Nakamachi, A new contact algorithm of dynamic explicit FEM for sheet forming simulation, Proc. 5th ICTP (1996) 683-686, SMF/E-P FEM/E-V-P FEM, Japan
M. Gotoh/Z.G. Sun/A. Kakita, Non-Iterative rigid-plastic FEM, Proc. 5th ICTP (1996) 687-690, R-P FEM/forging, Japan
T. Takemasu/R. Matsunaga/T. Ozaki/R. Kamashita/H. Tsukamoto, Spline rolling of deep drawn cups, Proc. 5th ICTP (1996) 691-694, rotary forming, Japan
S.D. Kim/M.H. Park/D. Yang/D.G. Seo, Blank design for non-circular deep drawing process by the finite element method, Proc. 5th ICTP (1996) 695-698, SMF/deep drawing/FEM, Korea
J.H. Liu/K. Yamaguchi/S. Imatani/N. Takakura, Investigation on variation of drawability of laminated sheet metals using FEM simulations, Proc. 5th ICTP (1996) 699-702, SMF/deep drawing/clad sheet/FEM, Japan
S.G. Xu/K.J. Weinmann/S. Grupido, Effect of drawbead action in sheet tension in stamping, Proc. 5th ICTP (1996) 703-706, SMF/deep drawing/drawbead, USA
J. Tirosh/A. Shirizly/S. Yossifon, On recent progress in deep drawing processes by fluid-pressure assisted methods, Proc. 5th ICTP (1996) 707-710, SMF/hydrostatic forming, Israel
J. Endo/S. Ohba/T. Anzai, Virtual manufacturing for sheet metal processing, Proc. 5th ICTP (1996) 711-714, SMF, Japan
T. Machida/T. Okai/K. Yoshimatsu, Cup forming of fabric carbon fiber reinforced thermoplastics by ironing-assisted drawing method, Proc. 5th ICTP (1996) 715-718, SMF/ironing/deep -drawing, Japan
S.C. Tang, Application of an anisotropic hardening rule to springback prediction, Proc. 5th ICTP (1996) 719-722, SMF/spring back/shape cntrol, USA
Z. Kampus, Optimization of dies and an analysis of longitudinal cracks in cups made by deep drawing without blank holder, Proc. 5th ICTP (1996) 723-726, SMF/deep drawing/fracture, Slovenia
K. Imazu/T. Kobayashi, Studies on the stretch draw forming conditions of laminated steel, Proc. 5th ICTP (1996) 727-730, SMF/stretch draw/clad sheet, Japan
J.F. Duarte/J.J. Gracio/A.B. da Rocha, FLDs of aluminum sheets for linear and complex strain paths, Proc. 5th ICTP (1996) 731-738, SMF/FLD, Portugal
S. Yoshihara/K. Manabe/M. Yang/H. Nishimura, Fuzzy model optimization based on learning algorithm in the variable blank holder force control of circular cup deep drawing, Proc. 5th ICTP (1996) 735-738, SMF/deep drawing/fuzzy model, Japan
J.H. Kim/J.G. Ryn/C.S. Choi/K.H. Na/S.S. Kim, Investigation of warm deep drawability of square cups of ANSI 304 stainless sheet, Proc. 5th ICTP (1996) 739-742, warm deep draw/SMF/stainless steel, Korea
T. Kuwabara/S. Takahashi/ K. Ito, Springback analysis of sheet metal subjected to bending-unbending under tension I (Theory and results of numerical analysis), Proc. 5th ICTP (1996) 743-746, SMF/spring back/bending, Japan
S. Takahashi/T. Kuwabara/K. Ito, Springback analysis of sheet metal subjected to bending-unbending under tension II (Experimental verification), Proc. 5th ICTP (1996) 747-750, SMF/spring back/bending, Japan
E. Doege/M. Rambke, Numerical simulation of the sheet metal forming process based on deformation models of the elementary theory of plasticity, Proc. 5th ICTP (1996) 751-756, SMF/FDM, Germany
K. Katoh/K. Kondo, Proposal of lubricant test for thick sheet forming, Proc. 5th ICTP (1996) 757-760, tribology/friction test, Japan
M. Murata/Y. Adachi, Sheet metal bulging using high temperature liquid, Proc. 5th ICTP (1996) 761-764, hot bulge forming/SMF, Japan
, 5th ICTP-165, D.W. Lee /D.Y. Yang, Three-dimensional finite element analysis of general sheet metal forming processes by using continuum elements, Proc. 5th ICTP (1996) 765-770, SMF/R-P FEM, Korea
J. Danckert, The influence from the profile in the deep drawing of cylindrical cups, Proc. 5th ICTP (1996) 771-774, SMF/deep drawing, Denmark
S.D. Liu/X. Chen, One step FEM based concurrent engineering in sheet metal stamping, Proc. 5th ICTP (1996) 775-778, FEM/SMF, Canada
C.M. Kim/ K.C. Jeon/N.S. Kim/S. Chang/D.G. Seo, Drawbead drawing analysis and experimental verification using rectangular punches, Proc. 5th ICTP (1996) 779-782, SMF/drawbead, Korea
C.C. Wang/K.I. Mori/K. Osakada, Finite element simulation of thermo-deep-drawing of thermoplastic thick plates, Proc. 5th ICTP (1996) 783-786, SMF/FEM/thermoplastics, Japan
X. Dong/E. Nakamachi, Elastic/crystalline viscoplastic FE simulation of sheet forming processes, Proc. 5th ICTP (1996) 787-790, SMF/E-V-P FEM, Japan
C.M. Bordonaro/D. Lee, Springback analysis in plain strain sheet metal forming, Proc. 5th ICTP (1996) 791-795, SMF/spring back, USA
T. Hasebe/Y. Imaida, Effect of blank holder force on limiting drawing height in hydro-spark forming, Proc. 5th ICTP (1996) 797-800, SMF/hydro-spark forming, Japan
M. Podob, Surface treatments for improving the performance of stamping and deep draw tools, Proc. 5th ICTP (1996) 801-804, surface treatment/tool/deep drawing/Tribology, USA
F. Yoshida/R. Hino/T. Okada, Fracture strength in stretch bending at die-corner for sheet metal laminates, Proc. 5th ICTP (1996) 805-808, Stretch bending/clad metal, Japan
N. Takakura/Emwardy/S. Imatani/ K. Yamaguchi/, Deep drawing of aluminum sheets and foils by Maslennikov's Process, Proc. 5th ICTP (1996) 809-812, SMF/deep drawing, Japan
L. Shulkin/D.J. Rowan/G.L. Kinzel/T. Altan, A new hydraulic/nitrogen blank holder force control system, Proc. 5th ICTP (1996) 813-818, SMF/blank holder, USA
D. Tang/X. Wang, A study of overlapping vibration on blank holder for improving deep drawing, Proc. 5th ICTP (1996) 819-822, SMF/deep drawing/vibration/blank holder, China
Y. Goto/M. Shiraishi/M. Miyashita/S. Matsuyama, Deep drawing characteristics for cylindrical cups of sheet titanium; stainless steel and cold rolled carbon steel, Proc. 5th ICTP (1996) 823-826, SMF/deep drawing/Ti/stainless steel, Japan
J. An/A.H. Soni, Three dimensional computer simulation of a sheet metal hydroforming process, Proc. 5th ICTP (1996) 827-830, hydrostatic forming/SMF/deep drawing/FEM, USA
J.C. Gelin/P. Delassus, Modelling and optimal control of process parameters in the aquadraw deep drawing process, Proc. 5th ICTP (1996) 831-834, hydrostatic forming/SMF/deep drawing/FEM, France
Y. Kong/Y. Sun/X.J. Wang/R.H. Wagoner, Development of a new friction test device in sheet forming, Proc. 5th ICTP (1996) 835-838, SMF/tribology/friction test/bending, China
D. Banabic/Gh. Achimas/P. Berce, The punch-stretching process in a vibratory regime, Proc. 5th ICTP (1996) 839-842, SMF/punch stretching/vibration, Romania
S. Sriram/R.H. Wagoner/D. Gearing, Affordable testing for sheet forming applications, Proc. 5th ICTP (1996) 843-856, SMF/deep drawing/stretching/simulation test, USA
P.Chabrand/O. Chertier, Variable friction coefficient model in deep drawing, Proc. 5th ICTP (1996) 857-860, SMF/tribology/friction/deep drawing, France
X.B. Hu/Y.Q. Guo/J.L. Batoz, Inverse approach for sheet metal forming using explicit; implicit static and DR algorithms, Proc. 5th ICTP (1996) 861-864, SMF/FEM, France
P.L.W.M. Barten/R.J.J.M. Sniekers, A comparison of the flat die simulator and the radial strip drawing test, Proc. 5th ICTP (1996) 865-868, SMF/tribology test/friction/bending, Netherlands
K. Kobatake/H. Sekiguchi, A new beading method for bent hollow bars, Proc. 5th ICTP (1996) 871-874, Novel process/tube bending, Japan
M. Takahashi/Y. Murakoshi/T. Sano/S. Fuchizawa, Blanking of an amorphous alloy by ion implanted P/M high speed steel punch, Proc. 5th ICTP (1996) 875-878, shearing/ion-implantation/amorphous, Japan
A. Azushima, Development of a new simulation method by means of tribo-simulator controlled by computer for sheet metal forming, Proc. 5th ICTP (1996) 879-882, SMF/Tribology simulator/friction, Japan
E. Thomsen, Sheet metal work of thin sections in antiquity, Proc. 5th ICTP (1996) 883-885, SMF, USA
M. Yamashita/M. Gotoh/E. Fujita/T. Hoshino, Development of drop-hammer compression and tension apparatus with controlled stopping device and their several applications, Proc. 5th ICTP (1996) 887-890, drop forging/compression test/tension test, Japan
M. Kiuchi/S. Sugiyama, SCR process; a new technology for manufacturing semi-solid alloys, Proc. 5th ICTP (1996) 891-894, semi-solid processing, Japan
C.G. Kang/Y.H. Seo/D.W. Kang, Fabrication of semi-solid aluminum alloy and its forging limit under the controlled solid fraction, Proc. 5th ICTP (1996) 895-898, semi-solid processing, Korea
J. Zasadzinski/M. Galanty/W. Libura/J. Richert, Structure and properties of metals powder based on Al obtained by adhesive forming, Proc. 5th ICTP (1996) 899-901, powder froming, Poland
U. Engel/M. Geiger/A. Messner, Advanced concept for the FE-simulation of metal forming processes for the production of microparts, Proc. 5th ICTP (1996) 903-906, microfabrication/FEM, Germany
N. Tsuji/Y. Saito, Microstructure and mechanical property of the Al-Si alloy strips direct-rolled from molten state, Proc. 5th ICTP (1996) 907-910, continuous casting, Japan
K. Hokamoto/S. Tanaka/M. Fujita/T. Kugimoto/A. Chiba/S. Itoh/T. Mashimo, Hot dynamic compaction of hard-to-consolidate powders using converging underwater shock wave, Proc. 5th ICTP (1996) 911-914, poder forming/consolidation, Japan
A. de Winter/J.A.G. Kals, Sheet metal forming in relation to the environment, Proc. 5th ICTP (1996) 915-918, SMF/environment, Germany
S. Wang/R. Ciarski/A. Makinouchi/T. Nakagawa, Comparison of different contact search algorithms for 3D visco-plastic FEM simulation of blow molding process of polymers, Proc. 5th ICTP (1996) 919-922, blow molding/V-P FEM, Japan
F. Abe/K. Osakada, A study of laser prototyping for direct manufacturing of dies from metallic powders, Proc. 5th ICTP (1996) 923-926, Laser prototyping/powder forming, Japan
K. Swiatkowski, Analysis of the physical modelling investigations, Proc. 5th ICTP (1996) 927-930, Physical modelling, Poland
N. Kanetake/E. Maeda/T. Choh, New consolidation process for metal powder by compressive torsion forming, Proc. 5th ICTP (1996) 931-934, powder forming/Consolidation, Japan
H. Iseki/T. Shioura/K. Sato, Practical development of press-molding machine with small punching tool, Proc. 5th ICTP (1996) 935-938, incremental forming/spinning, Japan
S. Golovashchenko, Impulsive electromagnetic tubes shearing process, Proc. 5th ICTP (1996) 939-942, Shearing/electro-magnetic forming, Russia
S.J. Yuan/Y.S. Zeng/Z.R. Wang, The integral hydro-bulging forming of ellipsoidal shells, Proc. 5th ICTP (1996) 943-946, SMF/bulge forming, China
B. Zhu/X. Dong/J. Zhu/S. Kotake/Y. Suzuki/M. Senoo, Acoustic emission testing analysis for bulging of sheet metal, Proc. 5th ICTP (1996) 947-950, AE/bulge forming, China
T. Hasebe/S. Shima/Y. Imaida, Deformation analysis in incremental hammering, Proc. 5th ICTP (1996) 951-954, incremental forming, Japan
S. Imatani/T. Nakata/K. Yamaguchi, Solidification analysis by finite element method - a novel approach based on integral penalty method, Proc. 5th ICTP (1996) 955-958, Solidification/FEM, Japan
K. Siegert/A. Mock/R. Malek/S.Y. Oh, Flexible micro metal forming with ultrasonically oscillating dies, Proc. 5th ICTP (1996) 959-962, Vibration/hobbing/microfabrication, Germany
Z.R. Wang/D. Kun/Y. Shijian/W. Fengzhi/F. Yi, A study of sheet metal CNC incremental expanding forming, Proc. 5th ICTP (1996) 963-966, incremental forming, China
Z.R. Wang/Y.S. Zhi/Y.S. Zeng/S.J. Yuan/F.Z. Wang, The experimental research and FEM simulation of hydrobulging the center part of the container head, Proc. 5th ICTP (1996) 967-970, bulge forming/FEM, China
M. Kleiner/D. Arendes, The manufacture of non-linear aluminum sections applying a combination of extrusion and curving, Proc. 5th ICTP (1996) 971-974, extrusion/section bending, Germany
M. Kleiner/A. Gartzke/R. Kolleck/J. Rauer/T. Weidner, Finite element simulation for high-pressure sheet metal forming (HBU process) and tool construction, Proc. 5th ICTP (1996) 975-983, SMF/hydrostatic forming/FEM, Germany
K. Shinagawa, Effect of temperature increase on transformation-induced plasticity during tensile testing, Proc. 5th ICTP (1996) 987-990, tensile test/Martensitic transformation, Japan
T. Ishikawa/T. Okuya/ N. Yukawa/T. Jimma, Deformation-induced martensitic transformation of SUS 304 stainless steel under various stress conditions, Proc. 5th ICTP (1996) 991-994, Martensitic transformation, Japan
K. Kato/ N. Suzuki/R.H. Chen, Effect of material mixture composition on forming property of smooth surface and welding in ceramic injection moulding, Proc. 5th ICTP (1996) 995-998, ceramic injection moulding, Japan
Z.M. Zhou/G.R. Bai/J.Z. Xu/W.L. Gao/J.P. Li, An improved model of dislocation patterns for plastic deformation, Proc. 5th ICTP (1996) 999-1002, dislocation plasticity, China
H. Kotera/S. Shima/Y. Ujie, A study of constitutive behavior of powders by 3-D particulate modeling, Proc. 5th ICTP (1996) 1003-1006, powder forming/numerical simulation, Japan
, 5th ICTP-219, F.S. Jan/ K. Yamaguchi/S. Imatani/N. Takakura, Effect of strain rate on compaction characteristics of iron powders, Proc. 5th ICTP (1996) 1007-1010, powder forming/powder compaction, Japan
X.J Wang/J. Yi/D. Cui/Y. Yang, Computer simulation of steel recrystallization with the Monte Carlo method, Proc. 5th ICTP (1996) 1011-1014, recrystallization/numerical simulation, China
J. Shi/B. Kong/X.J. Wang/Y. Lou, Improvement of deep-drawability of IF steel through texture control, Proc. 5th ICTP (1996) 1015-1018, deep drawability/crystallographic texture, China
Y.G. Meng/L.M. Qian/Y. Chen/H. Saiki, Characterization of mixed lubrication state by fractal analysis of electrical contact resistance, Proc. 5th ICTP (1996) 1019-1022, tribology/electrical contact resistance/fractal analysis, China
A. Gavrus/E. Massoni/J.L. Chenot, Thermoviscoplastic parameter identification using a computer aided rheology method for torsion-tensile test analysis, Proc. 5th ICTP (1996) 1023-1026, torsion-tensile test/rheology, France
I. Fukuda/H. Yamamoto/M. Ohmori/Y. Ishigori/M. Fujita, The effect of carbon content on the temperature and strain rate dependences of yield stress of steels subjected to shock pressure, Proc. 5th ICTP (1996) 1027-1030, constitutive equation, Japan
L. Gunnarsson/E. Schedin, Use of the acoustic emission technique to monitor tribological events during sheet forming, Proc. 5th ICTP (1996) 1031-1034, AE/tribology test, Sweden